참고문헌
- Ceramic Processing before Firing Tape Casting of Ceramics R. E. Mistler;D. J. Shanefield;R. B. Runk;G. Y.Onoda(ed.);L. L. Hench(ed.)
- Material Science and Technologhy, Characterization of Materials Thermoanalytical Methods Patrick K. Gallagher;R. W. Cahn(ed.);P. Hasssen(ed.);E. J. Kramer(ed.)
- Introduction to Polymer Viscoelasticity Time-Temperature Correspondence J. J. Aklonis;W. J. Macknight
- Am.Ceram.Soc.Bull. v.64 no.5 Strength of Tape Casting Tapes Susan Forte;John R. Morris, Jr.;W. Roger Cannon
- Adv. Ceram. Mater. v.3 no.4 Casting Behavior and Tensile Strength of Cast Ba-TiO₃ Tape Angela Karas;Toshiya Kumagai;W. Roer Cannon
- Am. Ceram. Soc. Bull. v.62 no.4 Dependence of Compaction on the Glass Transition Temperature of the Binder Phase Robert A. Dimilia;James S. Reed
- J. Mater. Sci. Lett. v.13 New Process for Fabricating Interconnect Plate for a Planar Solid Oxide Fuel Cell N. M. Sammes;R. Ratnaraj
- J. Am. Ceram. Soc. v.77 no.8 Processing of Tape-Cast Laminates Prepared from Fine Alumina/Zirconia Powders K. P. Plucknctt;C. H. Careres;C. Hughes;D. S. Wilkinson
- Macromolecules v.29 no.3 DMTA and FTIR Investigation of the Phase Behavior of Poly(methyl methacrylate)-poly(4-vinylphenol) Blends Li Dean;Josee Brisson
- J. Adhe. v.56 no.1-4 Study of the Interphase Region in Carbon Fiber/epoxy Composites using Dynamic Mechanical Thermal Analysis K. E. Atkinson;C. Jones
- J. Mater. Sci. Mater. v.8 no.6 Extent of Conversion and Its Effect on the Mechanical Performance of Bis-GMA/PEGDMA-based Resins and Their Composites with Continuous Glass Fibres A. C. Karmaker;A. T. Dinenedetto;A. J. Goldberg
- J. Appl. Poly. Sci. v.61 A Dynamic Mechanical Thermal Analysis on Allylester Polymers and Filled with Alumina Jyongsik Jang;Jieun Yi
- J. Appl. Poly. Sci. v.63 Thermal and Dynamic Mechanical Invetigation on Fiber-Reinforced Polypropylene Composites A Amash;P. Zugenmaier
- Bioceramics v.10 Fabrication of In-Ceram Core by Sheet Forming Process D.-J Kim;M.-H Lee;C.-E Kim
- Am. Ceram. Soc. Bull. v.71 no.11 The Role of Slip Additives in Tape Casting Technology: Part Ⅱ-Binder and Plasticizers Rodrigo Moreno
- Polymer Testing v.4 Dynamic Mechanical Method in the Characterization of Solid Polymers R. E. Wetton
- Dynamic Mechanical Analysis of Polymeric Material Molecular Interpretation Takayuki Murayama
- Thermal Characterization of Polymeric Materials Thermoplastic Polymers Shalaby W. Shalaby;A. Turi(ed.)
- Solid State Tech. Properties of Multilayer Ceramic Green Sheets R. A. Gardner;R. W. Nufer
- J. Eur. Ceram. Soc. v.15 Tape-casting : Relation Between Organic Constituents and the Physical and Mechanical Properties of Tapes M. Descamps;G. Ringuet;D. Legerm;B. Thierry
- The Technology of Plasticizers Plasticizer Effects in PVC: Effects on Physical Properties J. K. Sears;J. R. Darby
- Plasticization and Plasticizer Process Glass Transition Temperature of Polymers M. C. Shen;A. V. Tobolosky
- J. Poly. Sci. v.34 Free Volume in Plasticized Polyvinyl Chloride J. Borek;W. Osoba
- J. Mater. Sci. v.31 Preparation of Porous Nickel Electrodes for Molten Carbonate Fuel Cells by Non-aqueous Tape Casting E. Antoloni;M. Ferretti;S. Gemme