Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Fabrication and Mechanical Property of $Al_2$O$_.3$/Al Composite by Pressureless Infiltration

무가압 침윤법에 의한 $Al_2$O$_.3$/Al 복합재료 제조와 기계적 특성

  • 이동윤 (한국과학기술연구원 복합기능 세라믹스 연구센터) ;
  • 박상환 (한국과학기술연구원 복합기능 세라믹스 연구센터) ;
  • 이동복 (성균관대학교 공과대학 금속공학과)
  • Published : 1998.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The fabrication of Al2O3/Al composite by pressureless infiltration was investigated by the change of Mg and Si content in Al alloy infiltration process and infiltration atmosphere. The effect of alloying elements infiltration atmosphere and interfacial reactants between Al alloy matrix and Al2O3 particles were in-vestigated in terms of bendingstrength and harness test,. The fabrication of Al2O3/Al composite by the vestigated in terms of bending strength and hardness test. The fabrication of Al2O3/Al composite by the pressureless infiltration was done in nitrogen atmosphere with Mg in Al alloy. It was successfully fabricated at $700^{\circ}C$ according to Mg contents in Al alloy and infiltration condition. Because Mg in the Al alloy and ni-trogen atmosphere of infiltratio condition produced Mg-N compound(Mg3N2) it decreased the wetting an-gle between molten Al alloy and Al2O3 particles by coating on surface of Al2O3 particles. The fracture strength of Al2O3/Al-Mg composite was 800MPa and Al2O3/Al-Si-Mg composite was 400MPa. Si in Al alloy decreased the interfacial strength between Al alloy matrix and Al2O3 particles.

Keywords

References

  1. JOM v.5 no.1 Metal-Matrix Composites in the Automotive Industry: Opportunities and Challenges John E. Allison;Gerald S. Cole
  2. J of Mat. sci. v.26 no.447 The Fabrication of Metal Matrix Composites by a Pressureless Infiltration Technique M.K. Aghajanian;M.A. Rocazella;J.T. Burke;S.D. Keck
  3. Metal. Trans. v.26A no.1491 Infiltration and Wetting of Alumina Particulate Performs by Aluminum and Aluminum-Magnesium Alloys T.J. Jonas;J.A. Cornie;K.C. Russell
  4. 34th Inter. SAMPE Sys. v.817 A New Infiltration Process for the Fabrication of Metal Matrix Composites M.K. Aghajanian;J.T. Burke;D.R. White;A.S. Nagelberg
  5. 공학 석사 학위 논문 무가압 액상 용침법에 의한 Al₂O₃/Al 복합재료 제조에 관한 연구 이동윤
  6. Metal. Trnas. v.27B no.51 Variation of Contact Angles with Temperature and Time in the Al-Al₂O₃System W.H. Jung;H.S. Song;S.W. Park;D.Y. Kim
  7. Mater. Sci. and Eng. A v.195 Feasibility of Aluminium Nitride Formation in Aluminum Alloys Qinghua Hou;Raj Mutharasan;Michael Koczak
  8. 대한금속학회지 v.34 no.1074 진공 Compo-Casting 방법으로 제조된 A356 Al-SiCP 복합재료의 미세조직과 기계적 성질 김우상;정동섭;이성학
  9. 34th Inter. SAMPE sys. v.2440 Miicrostructures and Properties of Discontinuous Metal Matrix Composites Formed by a Unique low Cost pressureless Infiltration Technique J.T. Burke;M.K. Aghajnian;M.A. Rocazella
  10. 「Whisker-and Fiber-Toughened Ceramics」Proceedings of an International Conference Strength and Toughness of Fiber-Reinforced Ceramics and Related Interface Behavior D. Lewis Ⅲ
  11. 대한금속학회지 v.29 no.2 주조 A356.0 Al-SiC 복합재료의 기계적 성질과 파괴과정에 대한 공정 Si입자의 영향 김영환;이성학;김낙준;이두영
  12. ASM Handbook v.2 no.989