초록
화학기상증착법을 이용하여 tetramethylsilane(TMS)과 hexamethyldisilane(HMDS)으로부터 SiC층을 증착시켰다. 반응관 내의 압력은 1torr를 유지시켰으며, $H_2$ 가스를 사용하여 precursor를 반응로내로 수송하였고 $1200^{\circ}C$의 반응온도로 SiC 증착이 이루어졌다. 기판은 tantalum으로 masking한 Si-wafer와 platinum, molybdenum으로 masking한 MgO 단결정을 사용하였다. 금속층(Ta, Pt, Mo)에서의 SiC 증착 양상과 Si, MgO 위에서의 SiC 증착 양상을 비교함으로써 SiC 증착의 선택성을 관찰하였다. 증착층의 주된 상은 X-선 회절분석에 의해 $\beta-SiC$로 확인되었다. 또한 전자현미경 분석을 통해 각 층에서의 증착 양상의 차이를 조사하였다.
SiC thin films were deposited by chemical vapor deposition method using tetramethylsilane (TMS) and hexamethyldisilane (HMDS). The chamber pressure during the deposition was kept at about 1 torr. Precursor was transported to the reaction chamber by $H_2$gas and SiC deposition was carried out at the reaction temperature of $1200^{\circ}C$. Si-wafer masked with tantalum and MgO single crystal covered with platinum and molybdenum were used as substrates. The selectivity of SiC deposition was observed by comparing the microstructure between metal (Ta, Pt, and Mo) surfaces and substrate surfaces (Si and MgO). The deposited films were identified as the $\beta-SiC$ phase by X-ray diffraction pattern. Also, the deposition -behavior of SiC on each surface was investigated by the scanning electron microscope analysis.