Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)
- Volume 22 Issue 3
- /
- Pages.493-503
- /
- 1998
- /
- 1226-4873(pISSN)
- /
- 2288-5226(eISSN)
DOI QR Code
Sectional forming analysis by membrane finite elements considering bending effects
굽힘효과를 고려한 박막 유한요소에 의한 단면 성형해석
- Kim, Jun-Bo (Dept. of Mechanical Engineering, Hanyang University) ;
- Lee, Gwang-Byeong (Dept. of Mechanical Engineering, Hanyang University) ;
- Keum, Yeong-Tak (Dept. of Mechanical Engineering, Hanyang University)
- Published : 1998.03.01
Abstract
The sectional forming analysis considering bending effects from the geometrically deformed shape of two linear membrane finite elements(called super element) was performed under plane strain assumption for analyzing forming processes of an arbitrarily shaped draw-die. For the evaluation of bending effects, the bending equivalent forces are calculated from the bending moment computed using the changes in the interior angle at the middle node of super element, and are agumented to the membrane stretch forces. In order to verify the validity of the bending formulation, the simulation results for the stretch, draw, and bend sections were compared with membrane analysis results and measurements.
Keywords