연속반응기에서 Styrene과 n-Butylmethacrylate의 용액 공중합의 속도론

The Kinetics of Solution Copolymerization of styrene and n-Butylmethacrylate in a Continuous Stirred Tank Reactor(CSTR)

  • 김남석 (동아대학교 화학공학과) ;
  • 설수덕 (동아대학교 화학공학과)
  • Kim, Nam Seok (Dept. of Chemical Engineering, Dong-A University) ;
  • Seul, Soo Duk (Dept. of Chemical Engineering, Dong-A University)
  • 투고 : 1996.10.24
  • 심사 : 1997.03.19
  • 발행 : 1997.06.10

초록

스티렌(St)과 n-부틸메타크릴레이트(n-BMA)를 용매인 톨루엔에서 과산화벤조일(BPO)를 개시제로 사용하여 $80^{\circ}C$에서 연속반응기를 사용하여 용액공중합을 행하였다. 반응물 부피, 체류시간은 각각 0.6L, 3시간으로 하였다. 단량체 반응성비 $r_1$(St)과 $r_2$(BMA)는 Kelen-Tudos방법 (또는 Fineman-Ross방법)으로 결정하였다. : $r_1$=0.75(0.67), $r_2$=0.61(0.56). 공중합체의 가교정지인자, $\phi$값은 스티렌의 전체 조송에 대해 0.44~0.78값을 가지고 공중합체내 스티렌 조송이 증가할수록 $\phi$값도 증가하고 있다. 스티렌과 부틸메타크릴레이트의 공중합반응은 2차 반응속도식에 따랐으며 시뮬레이션한 전환율과 공중합 속도를 실험결과와 비교하였다. 동족인 정상상태에 도달하는 평균시간은 체류시간의 3.5배였다.

Solution copolymerization of Styrene(St) and n-Butylmethacrylate(BMA) was carried out with Benzoylperoxide (BPO) as an initiator in toluene at $80^{\circ}C$ in a continuous stirred tank reactor. Reaction volume and residence time were 0.6 liters, 3 hours respectively. The monomer reactivity ratios, $r_1$(St) and $r_2$(BMA) were determined by both the Kelen-Tlidos method and the Fineman-Ross method ; $r_1$=0.75(0.67), $r_2$=0.61(0.56). The cross-termination factor, $\phi$ factor of the copolymer over the entire St compositions ranged from 0.44 to 0.78. The $\phi$ factors of St-BMA copolymer increased with increasing St compositions. Our present system showed that the continuous copolymerization of St with BMA followed second-order kinetic behavior. The simulated conversions and copolymerization rates were compared with the experimental results. The average time to reach dynamic steady-state was three times and half of the residence time.

키워드

참고문헌

  1. ACS Symposium Series-Catalysis in Polymer Synthesis Vanderberg, E. J.;Salamone, J. C.
  2. Appl. Poiym. Sci. v.25 Gupta, M. C.;Nath, J. D.
  3. Appl. Poly. Sci. v.39 Das, S.;Rodriguez, F. J.
  4. Appl. Poly. Sci. v.32 Das, S.;Rodriguez, F. J.
  5. J. Poly. Sci v.17 B. B. Shin;B. K. Min;S. D. Seul
  6. Chem. Eng. Commun. v.16 K. S. Balaraman;B. D. Kulkarni;R. A. Mashelkar
  7. J. Macromol. Sci., Chem. v.A-9 T. Kelen;F. Tudos
  8. J. Polym. Sci. v.66 M. Finneman;S. D. Ross
  9. Trans. Faraday. Soc. v.49 G. M. Burnett;P. Evans;H. W. Melville
  10. v.69 T. Otsu;T. Ito;M. Imoto;Kogyo Kagaku Zasshi
  11. J. Polym. Sci. v.9 K. Ito
  12. J. Polym. Sci. v.8 no.111 Morton;M.;Salatiello, P. P.;Landfileld, H.
  13. J. Am. Chem. Soc. v.71 Smith, W. V.
  14. J. Am. Chem. Soc. v.65 Flory, P. J.
  15. Elements of chemical Reaction Engineering Fogker, H. S.
  16. Polymer Handbook(3rd. Ed.) v.II J. Bran drup;E. H. Immergut
  17. Free Radicals in solution Walling, C.
  18. J. Polym. Chem. v.16 Ito, K.(ed.)
  19. Polym. v.4 North, A. M.
  20. Trans, Faraday. Soc. v.58 Atherton;J. N.;North, A. M.
  21. Polym. Prepr. v.8 no.1 O'Driscoll, K. F.;Wertz, W.;Husar, A.
  22. J. Polym. Sci. v.A-1 O'Driscoll, K. F.;Wertz, W.;Husar, A.