DOI QR코드

DOI QR Code

Transverse and longitudinal partial interaction in composite bolted side-plated reinforced-concrete beams

  • Oehlers, D.J. (Department of Civil & Environmental Engineering, The University of Adelaide) ;
  • Nguyen, N.T. (Department of Civil & Environmental Engineering, The University of Adelaide) ;
  • Ahmed, M. (Department of Civil & Environmental Engineering, The University of Adelaide) ;
  • Bradford, M.A. (Department of Structural Engineering, University of New South Wales)
  • 발행 : 1997.09.25

초록

A procedure is being developed for bolting plates to the sides of existing reinforced concrete beams to strengthen and stiffen them. Unlike standard composite steel and concrete beams in which there is longitudinal-partial-interaction at the steel/concrete interface (that is slip along the length of the beam), composite bolted side-plated reinforced-concrete beams are unique in that they also exhibit transverse-partial-interaction, that is slip transverse to the length of the beam. In this work, the fundamental mathematical models for transverse-partial-interaction and its interaction with longitudinal-partial-interaction are developed. The fundamental models are then further developed to determine the number of connectors required to resist the transverse forces and to limit the degree of transverse-partial-interaction in bolted side-plated reinforced concrete beams.

키워드

참고문헌

  1. Ahmed, M. (1996), "Strengthening of reinforced concrete beams by bolting steel plates to their sides", Masters Thesis, Dept of Civil & Env. Engng., The University of Adelaide, Australia.
  2. Jones R., Swamy R.N. and Charif A. (1988), "Plate separation and anchorage of reinforced concrete beams strengthened by epoxy-bonded steel plates", The Structural Engineer, 66(5), 85-94.
  3. Newmark N.M., Siess C.P. and Viest I.M. (1951), "Test and analysis of composite beams with incomplete interaction", Proceedings Society of Experimental Stress Analysis, 9(1), 75-92.
  4. Oehlers D.J. and Moran J.P. (1990), "Premature failure of externally plated reinforced concrete beams", J. of Structural Engineering, ASCE, 116(4), 979-995.
  5. Oehlers D.J. (1992), "Reinforced concrete beams with plates glued to their soffits", J. of Structural Engineering, ASCE, 118(8), 2023-2038. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2023)
  6. Oehlers D.J. and Bradford (1995), Composite Steel and Concrete Structural Members-Fundamental Behaviour, Pergamon, UK.
  7. Oehlers D.J. and Sved, G. (1995), "Composite beams with limited-slip-capacity shear connectors", J. of Structural Engineering, ASCE, 121(6), 932-938. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:6(932)
  8. Oehlers D.J. and Coughlan, C.G. (1986), "The shear stiffness of stud shear connection in composite beam", J. of Constructional Steel Research, 6, 273-284. https://doi.org/10.1016/0143-974X(86)90008-8

피인용 문헌

  1. Analytical solution of linear elastic beams cracked in flexure and strengthened with side plates vol.47, pp.22, 2013, https://doi.org/10.1177/0021998312459780
  2. Shear Performance of Fire-Damaged Reinforced Concrete Beams Repaired by a Bolted Side-Plating Technique vol.143, pp.5, 2017, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001726
  3. Numerical Study on the Local Buckling Behaviour of Bolted Steel Plates in Steel Jacketing vol.2017, 2017, https://doi.org/10.1155/2017/1352084
  4. Strength of reinforced concrete columns bonded with external steel plates vol.54, pp.1, 2002, https://doi.org/10.1680/macr.2002.54.1.61
  5. Effects of plastic hinges on partial interaction behaviour of bolted side-plated beams vol.66, pp.5, 2010, https://doi.org/10.1016/j.jcsr.2010.01.002
  6. Development of design rules for retrofitting by adhesive bonding or bolting either FRP or steel plates to RC beams or slabs in bridges and buildings vol.32, pp.9, 2001, https://doi.org/10.1016/S1359-835X(01)00089-6
  7. Experimental Study on Embedded Steel Plate Composite Coupling Beams vol.131, pp.8, 2005, https://doi.org/10.1061/(ASCE)0733-9445(2005)131:8(1294)
  8. PARTIAL-INTERACTION ANALYSIS OF COMPOSITE BEAM/COLUMN MEMBERS* vol.30, pp.3, 2002, https://doi.org/10.1081/SME-120004420
  9. Nonlinear response of bolt groups under in-plane loading vol.29, pp.4, 2007, https://doi.org/10.1016/j.engstruct.2006.06.003
  10. Optimization of partial interaction in bolted side-plated reinforced concrete beams vol.131, 2014, https://doi.org/10.1016/j.compstruc.2013.10.007
  11. Semi-compact steel plates with unilateral restraint subjected to bending, compression and shear vol.56, pp.1, 2000, https://doi.org/10.1016/S0143-974X(99)00073-5
  12. Experimental Study of Moderately Reinforced Concrete Beams Strengthened with Bolted-Side Steel Plates vol.16, pp.3, 2013, https://doi.org/10.1260/1369-4332.16.3.499
  13. Effects of bolt–plate arrangements on steel plate strengthened reinforced concrete beams vol.32, pp.6, 2010, https://doi.org/10.1016/j.engstruct.2010.02.028
  14. Non-linear analysis of side-plated RC beams considering longitudinal and transversal interlayer slips vol.16, pp.6, 2014, https://doi.org/10.12989/scs.2014.16.6.559
  15. Retrofitting reinforced concrete beams by bolting steel plates to their sides -Part 1: Behaviour and experiments vol.10, pp.3, 2000, https://doi.org/10.12989/sem.2000.10.3.211
  16. Longitudinal Partial Interaction in Bolted Side-Plated Reinforced Concrete Beams vol.17, pp.7, 2014, https://doi.org/10.1260/1369-4332.17.7.921
  17. Local buckling of bolted steel plates with different stiffener configuration vol.119, 2016, https://doi.org/10.1016/j.engstruct.2016.03.053
  18. Shear performance of bolted side-plated reinforced concrete beams vol.144, 2017, https://doi.org/10.1016/j.engstruct.2017.04.043
  19. Shear transfer in bolted side-plated reinforced concrete beams vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.06.007
  20. An analytical model for reinforced concrete beams with bolted side plates accounting for longitudinal and transverse partial interaction vol.38, pp.38-39, 2001, https://doi.org/10.1016/S0020-7683(01)00036-1
  21. Design of bolted side-plated reinforced-concrete beams with partial interaction vol.169, pp.2, 2016, https://doi.org/10.1680/jstbu.15.00037
  22. Local Buckling of Side-Plated Reinforced-Concrete Beams. II: Experimental Study vol.125, pp.6, 1997, https://doi.org/10.1061/(asce)0733-9445(1999)125:6(635)
  23. Experimental study on flexural strength of modular composite profile beams vol.7, pp.1, 1997, https://doi.org/10.12989/scs.2007.7.1.071
  24. Experimental study on flexural strength of reinforced modular composite profiled beams vol.8, pp.4, 1997, https://doi.org/10.12989/scs.2008.8.4.313
  25. Study on behavior of T-section modular composite profiled beams vol.10, pp.5, 1997, https://doi.org/10.12989/scs.2010.10.5.457
  26. Behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 2: Evaluation of theoretical strength vol.34, pp.5, 2010, https://doi.org/10.12989/sem.2010.34.5.563
  27. Analytical solution of two-layer beam including interlayer slip and uplift vol.34, pp.6, 1997, https://doi.org/10.12989/sem.2010.34.6.667
  28. Analysis of side-plated reinforced concrete beams with partial interaction vol.8, pp.1, 2011, https://doi.org/10.12989/cac.2011.8.1.071
  29. A piecewise linear transverse shear transfer model for bolted side-plated beams vol.62, pp.4, 2017, https://doi.org/10.12989/sem.2017.62.4.443
  30. Flexural capacity model for RC beams strengthened with bolted side-plates incorporating both partial longitudinal and transverse interactions vol.168, pp.None, 1997, https://doi.org/10.1016/j.engstruct.2018.04.069
  31. Numerical simulation of the shear capacity of bolted side-plated RC beams vol.171, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.06.003
  32. Experimental Study on the Shear Performance of Reinforced Concrete Beams Strengthened with Bolted Side-Plating vol.11, pp.9, 1997, https://doi.org/10.3390/su11092465
  33. Repair of Fire-Damaged Reinforced Concrete Flexural Members: A Review vol.11, pp.19, 2019, https://doi.org/10.3390/su11195199
  34. Seismic performance improvement of GFRP-RC moment frames vol.47, pp.6, 1997, https://doi.org/10.1139/cjce-2019-0274