Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Rate-sensitive analysis of framed structures part II: implementation and application to steel and R/C frames

  • Fang, Q. (Department of Civil Engineering, Imperial College) ;
  • Izzuddin, B.A. (Department of Civil Engineering, Imperial College)
  • Published : 1997.05.25
⟨ Previous Next ⟩

Abstract

The companion paper presents a new three-parameter model for the uniaxial rate-sensitive material response, which is based on a bilinear static stress-strain relationship with kinematic strain-hardening. This paper extends the proposed model to trilinear static stress-strain relationships for steel and concrete, and discusses the implementation of the new models within an incremental-iterative solution procedure. For steel, the three-parameter rate-function is employed with a trilinear static stress-strain relationship, which allows the utilisation of different levels of rate-sensitivity for the plastic plateau and strain-hardening ranges. For concrete, on the other hand, two trilinear stress-strain relationships are used for tension and compression, where rate-sensitivity is accounted for in the strain-softening range. Both models have been implemented within the nonlinear analysis program ADAPTIC, which is used herein to provide verification for the models, and to demonstrate their applicability to the rate-sensitive analysis of steel and reinforced concrete structures.

Keywords

References

  1. Allgood, J.R. and Swihart, G.R. (1970), "Design of flexural members for static and blast loading", ACI Monograph, No. 5, Detroit, Michigan, 43-44.
  2. Chang, K.C., Sugiura, K. and Lee, G.C. (1989), "Rate-dependent material model for structural steel", Journal of Engineering Mechanics, ASCE, 115(3), 465-474. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:3(465)
  3. CEB (1988), "Structures under impact and impulsive loading", Bulletin dInformation No. 187, Comite Euro-International de Beton, CEB.
  4. Fu, H.C., Erki, M.A. and Seckin, M. (1991), "Review of effects of loading rate on reinforced concrete", Journal of Structural Engineering, ASCE, 117(12), 3660-3679. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:12(3660)
  5. Izzuddin, B.A. (1991), "Nonlinear dynamic analysis of framed structures", PhD thesis, Civil Engineering Department, Imperial College, London, U.K..
  6. Izzuddin, B.A. and Elnashai, A.S. (1993), "Adaptive space frame analysis. Part II: Distributed plasticity approach", Proceedings of the Institution of Civil Engineers, Structures and Buildings, 99, 317-326. https://doi.org/10.1680/istbu.1993.24353
  7. Izzuddin, B.A. and Fang, Q. (1997), "Rate-sensitive analysis of framed structures. Part I: Model frmulation and verification", Structural Engineering and Mechanics, An Intl Journal, 5(3), 221-238. https://doi.org/10.12989/sem.1997.5.3.221
  8. John, R. and Shah, S.P.(1987). "Constitutive modelling of concrete under impact loading", Proceedings of the First International Conference on the Effects of Fast Transient Loadings, W.J. Ammann, et al. (eds.), 37-65.
  9. Soroushian, P., Choi, K. and Alhamad, A. (1986), "Dynamic constitutive behavior of concrete", ACI Journal, 83(2), 251-258.
  10. Soroushian, P., and Choi, K. (1987), "Steel mechanical properties at different strain rates", Journal of Structural Engineering, ASCE, 113(4), pp.663-673. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:4(663)

Cited by

  1. Nonlinear Analysis of Blast Performance of Partially Prestressed RC Beams vol.2, pp.3, 2011, https://doi.org/10.1260/2041-4196.2.3.295
  2. AN IMPROVED ANALYTICAL METHOD FOR RESTRAINED RC STRUCTURES SUBJECTED TO STATIC AND DYNAMIC LOADS vol.14, pp.01, 2014, https://doi.org/10.1142/S0219455413500521
  3. A modified layered-section method for responses of fire-damaged reinforced concrete beams under static and blast loads vol.7, pp.4, 2016, https://doi.org/10.1177/2041419616658384
  4. Numerical and Experimental Investigations on the Blast-Resistant Properties of Arched RC Blast Doors vol.1, pp.3, 2010, https://doi.org/10.1260/2041-4196.1.3.425
  5. Dynamic Analysis of Prestressed Concrete Material Beams vol.48-49, pp.1662-7482, 2011, https://doi.org/10.4028/www.scientific.net/AMM.48-49.443
  6. Rate-sensitive analysis of framed structures Part I: model formulation and verification vol.5, pp.3, 1997, https://doi.org/10.12989/sem.1997.5.3.221
  7. Behavior and simplified analysis of steel-concrete composite beams subjected to localized blast loading vol.32, pp.2, 1997, https://doi.org/10.12989/sem.2009.32.2.337