Studies on the Selection of Standard Revegetation Measures on the Highway Cut-slopes

고속도로(高速道路) 절개(切開)비탈면에서 녹화공법(綠化工法) 선정기준(選定基準) 설정(設定)에 관(關)한 연구(硏究)

  • Woo, Bo-Myeong (Dept. of Forest Resources, College of Agri. and Life Sciences, Seoul Nat'l Univ.) ;
  • Kim, Kyung-Hoon (Dept. of Forest Resources, College of Agri. and Life Sciences, Seoul Nat'l Univ.)
  • 우보명 (서울대학교 농업생명과학대학 산림자원학과) ;
  • 김경훈 (서울대학교 농업생명과학대학 대학원)
  • Received : 1997.09.08
  • Published : 1997.12.31

Abstract

The purpose of this study was to figure out the suitable field standards for revegetation measures on cut-slopes in consideration of the environmental factors. The field survey was conducted from 1995 to 1996 on highway cut-slopes. The results obtained could be summarized as follows; The major revegetation measures surveyed were 5 major measures as a whole in descending order of seed-spraying measures, block-sod pitching measures, latticed block pitching measures, hydro-seeding measures with seed-fertilizer-soil materials, and several netting measures on highway cut-slopes. According to the analysis of the environmental factors, the plant coverage was affected several major environmental factors which were soil factors(soil hardness, soil texture, soil and rock condition), and site factors(slope gradient, slope length). From a viewpoint of optimum selection, the major 3 factors(soil factors, slope gradient factors, slope length factors) should be considered for selection of revegetation measures on highway cut-slopes.

절개(切開)비탈면을 대상으로 녹화공법(綠化工法) 선정시 현장에서 이용할 수 있는 실용성 높은 기준을 선정하기 위한 학술적 자료를 도출하기 위하여, 고속도로(高速道路) 절개비탈면에 시공되어 있는 녹화공법 시공 상황을 1995년부터 1996년까지 직접 현지 표본을 조사 분석한 결과는 다음과 같다. 조사대상 고속도로 절개비탈면에 적용된 녹화공법은 종자뿜어붙이기공법, 평떼붙이기공법, 격자틀붙이기공법, 종비토뿜어붙이기공법, 각종 녹화망덮기공법 등의 순으로 많이 시공되었다. 이들 비탈면의 식생피복도(植生被覆度)에 영향을 미치는 주 인자는 절개비탈면의 토양경도, 토성, 암반유무 등의 토질인자(土質因子)와 비탈면 경사, 길이 등의 입지인자(立地因子)인 것으로 분석되었다. 따라서, 절개비탈면에 적용할 수 있는 최적의 녹화공법을 선정하기 위해서는 비탈면의 토질상태(토양-토양경도지수 20mm, 30mm, 암반-연암, 경암 상태의 4조건), 비탈면 경사도($30^{\circ}C$, $45^{\circ}C$, $60^{\circ}C$의 3조건), 비탈면 길이(10m, 30m, 60m의 3조건) 등의 3인자를 필수요인으로 고려하는 것이 타당할 것이다.

Keywords