생물환경조절학회지 (Journal of Bio-Environment Control)
- 제6권3호
- /
- Pages.133-142
- /
- 1997
- /
- 1229-4675(pISSN)
- /
- 2765-3641(eISSN)
권취식 창개폐시스템의 소요토크모델 개발
Development of Theoretical Formulae for Calculation of Required Torque in Roll-up Type Ventilation System
초록
본 연구는 권취식 창개폐기의 설계 및 개발에 필요한 자료를 제시하고자 수행되었다. 기존의 단순 이론모델식으로는 정확한 권취토크를 예측할 수 없기 전문에 모형시험과 현장시험을 통하여 새로운 권취식 창개폐장치의 소요토크 모델식을 개발하였다. 본 연구에서의 결과를 요약하면 다음과 같다. 1. 권취식 창개폐장치에 있어서 권취토크는 곡부 권취면의 경사각을 따라 증가하는 경향을 나타내고 있으며, 경사각이 90
Most of the greenhouses employ the roll-up type ventilation control system. Torque required to roll-up and down might be theoretically expressed with the weight times radius of the ventilation roll; however, measured torques were two times of the theoretically estimated values. As the window film of roll-up vent is used over the periods of time, the warping and crumpling of the material caused the increase of the torque in addition to a span deformation. Therefore, this study was performed to develop an empirical torque formulae to present basic torque data and to assist the development of roll-up type ventilation control system. The empirically adjusted rolling radius (r+a) exponentially increased at the maximum span deformation. The coefficient of rolling resistance (Cr) was about 0.7―0.8 depending upon the wrinkle status of film material.
키워드