전산구조공학 (Computational Structural Engineering)

한국전산구조공학회 (Computational Structural Engineering Institute of Korea)
권호 표지

대형 구조물의 상설 감지를 위한 감지기의 최적 위치

Optimal Transducer Placement for Health Monitoring of Large Structural System

  • 황충열 (충북대학교 구조시스템공학과) ;
  • 허광희 (뉴멕시코대학 토목공학과)
  • 발행 : 1997.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 연구의 목적은 대형 구조물의 상설 감지를 위한 감지기의 최적 위치의 알고리즘을 개발하는데에 있다. 구조물의 진동을 이용한 감지 시스템은 장기적으로 계속해서 구조물을 자동으로 감지하는데에 좋은 방법중의 하나이다. 하지만 구조물의 진동을 정확히 계측하기 위해서는 감지기의 위치나 감지기의 숫자에 큰 영향을 받는데, 이와 같은 일은 대형 구조물에 있어서 쉽지가 않다. 최적의 감지기 위치와 최소의 감지기로 가장 정확한 데이터를 획득하기 위하여 최적합한 감지기의 위치를 위한 알고리즘이 개발되어 수치적 그리고 실험적으로 유용성을 보인다. EOT가 개발되어 모형 교량에 적용하여 EIM과 비교 분석된다. 이들의 비교를 통하여, 이 연구에서 제안되어진 EOT가 적은 수의 감지기로 좋은 결과를 보여, 상설감지의 목적에 적합함을 보여준다.

This research aims to develop an algorithm of optimal transducer placement for health monitoring of large structural system. The structural vibration response-based health monitoring is considered one of the best for the system which requires a long-term, continuous monitoring. In its experimental modal testing, however, it is difficult to decide on the measurement locations and their number, especially for complex structures, which have a major influence on the quality of the results. In order to minimize the number of sensing operations and optimize the transducer location while maximizing the accuracy of results, this paper discusses about an optimum transducer placement criterion suitable for the identification of structural damage for continuous health monitoring. As a criterion algorithm, it proposes the Kinetic Energy Optimization Technique (EOT), and then addresses the numerical issues which are subsequently applicable to actual experiment where a bridge model is used. By using the experimental data, it compares the EOT with the EIM(Effective Indefence Method) which is generally used to optimize the transducer placement for the damage identification and control purposes. The comparison conclusively shows that the EOT algorithm proposed in this paper is preferable when a structure is to be instrumented with fewer sensors for monitoring purpose.

키워드

참고문헌

  1. Proc. of Int. Workshop of Technology for Hong Kongs Infrastructure Development Dynamic Response and Structural Health Monitoring of Long-Span Cable-Supported Bridges Abdel-Ghaffar, A. M.;Masri, S. F.
  2. Offshore Technology Conference Structural Integrity Monitoring Using Digital Processing of Vibration Signals Begg, Robert D.;Mackenzie, Alexander C.;Dodds, Colin J.;Loland, Olaf
  3. Proceedings of the International Workshop on Civil Infrastructure Systems : Application of Intelligent systems and Advanced Materials on the Bridge Systems Bridge Monitoring Systems : An Overview Lee, G. C.;Liang, Z.
  4. Proceedings Nondestructive Evaluation of Civil Structures and Materials Nondestructive Evaluation Of Highway Bridges By Dynamic Monitoring Alampalli, S.;Fu, G.;Aziz, I. A.
  5. ASCE/EMD Speciality Conference Proceeding Ambient and Forced Vibration Studies of a Multistory Triangular-Shaped Building Petrovski, J.;Stephen, R.
  6. The International Journal of Robotics Research v.9 no.5 A bayesian Approach to Optimal Sensor Placement Cameron, A.;Durrant-Whyte. H
  7. Thesis, Purdue University Optimal Sensor/Actuator Selection, Number, and Placement for Liner Stochastic System Chiu, D.
  8. AIAA Journal v.22 no.9 Optimal Placement of Controls for Static Deformations of Space Structures Haftka, R. T.
  9. Journal of Guidance, Control, and Dynamics v.15 no.1 Method for Optimal Actuator and Sensor Placement for Large Felxible Structures Lim, K. B.
  10. Journal of Applied Mechanics v.45 Uniqueness of Damping and Stiffness Distributions in the Indentification of Soil and Structural Systems Udwadia, F. E.;Sharma, D. K.;Shah, P. C.
  11. JPL Proceeding of the Workshop on Identification and Control of Flexible Space Structures Optimal Sensor Locations for Structural Identification Udwadia, F. E.
  12. Second VPI & SU/AIAA Symposium on Dynamics and Control of Large Flexible spacecraft Fromulations and Applications of Large Structure Actuator and Sensor Placements Juang, J. N.;Rodriguez, G.
  13. J. of Eng. Mech. v.120 no.2 Methodology for Optimum Sensor Locations for Parameter Identification in Dynamic Systems Udwadia, F. E.
  14. Journal of Guidance, Control, and Dynamics v.15 no.2 Effect of Model Error on Sensor Placement for On-Orbit Modal Identification of Large Space Structures Kammer, D. C.
  15. Modal Testing : Theory and Practice Ewins, D. J.
  16. American Association of State Highway and Transportation Officials Standard Specification for Highway Bridges AASHTO
  17. SDRC Exploring I -DEAS Simulation v.I/II
  18. SDRC Exploring I -DEAS Design v.I/II