참고문헌
- 熔接變形殘留應力 左藤邦彦;上田幸雄;藤本二南
- Analysis of Welded Structures K. Masubushi
- 熔接構造便覽 左藤邦彦
- Report of Committee Ⅲ.1 International Ship and Offshore Structures Congress v.1 Ductule Collapse J.J. Jensen(et al.)
- 有限要素法ハンドブック(Ⅰ基礎編) 鷲津久一郞(外)
- 有限要素法ハンドブック(Ⅱ應用編) 鷲津久一郞(外)
- Report of Committee Ⅴ.1 International Ship and Offshore Structures Congress v.2 Applied Design-Strength Limit States Formulations T. Moan(et al.)
- Buckling Strength of Metal Structures F. Bleich
- Theory of Elastic Stability S.P. Timoshenko;J.M. Gere
- Ship Structural Design, A Rationally-Based, Computer-Aided, Optimization Approach O.F. Hughes
- International Shipbuilding Progress v.23 no.268 The Influence of the Torsional Rigidity of Plate Stiffeners on Plate Effectiveness D.G. Williams
- J. of the Society of Naval Architects of Japan v.174 A New Plate Buckling Design Formula (3rd Report)-On the Real Edge Condition J.K. Paik;J.Y. Kim;W.S. Kim;Y.S. Chung
- Buckling of Offshore Structures, A State-of-the-Art Review C.P. Ellinas;W.J. Supple;A.C. Walker
- Technical and Research Bulletin, No. 2-22, The Society of Naval Architects and Marine Engineers Charts for the Buckling and Post-Buckling Analyses of Stiffened Plates under Combined Loading A.E. Mansour
- 日本造船學會論文集 v.157 矩形板の彈性座屈相關關係式 上田幸雄;S.M.H. Rashed;白点基
- J. fo the Society of Naval Architects of Japan v.171 A New Plate Buckling Design Formula J.K. Paik;J.H. Ham;U.N. Kim
- J. of the Society of Naval Architects of Japan v.172 A New Plate Buckling Design Formula (2nd Report) - On the Plasticity Correction J.K. Paik;J.H. Ham;J.H. Ko
- Transactions of the American Society of Mechanical Engineers v.54 no.5 Strength of Thin Plates in Compression T. von Karman;E.E. Sechler;L.H. Donnell
- J. of Ship Research v.19 no.1 A Review of Effective Plating for Use in the Analysis of Stiffened Plating in Bending and Compression D. Faulkner
- Developments in ThinWalled Structures Effective Widths in Plate Buckling J. Rhodes;J. Rhodes(Ed.);A.C. Walker(Ed.)
- 日本造船學會論文集 v.159 大たわみを伴う矩形板の組合せ荷重に對する有校幅 上田幸雄;S.M.H. Rashed;白点基
- 대한조선학회논문집 v.28 no.1 2축압축력을 받는 단순지지평판에 대한 비선형거동의 해석해 백점기
- J. of Structural Engineering v.119 no.5 Effective Width of Locally Buckled Plates in Compression and Bending T. Usami
- Transactions of the Royal Institution of Naval Architects v.129 Strength and Stiffness of Ships` Plating Under In-Plane Compression and Tension C.S. Smith;P.C. Davidson;J.C. Chapman;P.J. Dowling
- 日本造船學會論文集 v.158 組合せ應力下での長方形板の最終强度(その2) 大坪英臣;吉田二郞
- 日本造船學會論文集 v.145 組合せ荷重を受ける平板の最終强度(第1報) -壓縮と剪斷を受ける正方形板 藤田 讓;野本敏治;仁保 治
- 日本造船學會論文集 v.156 組合せ荷重を受ける矩形板および防撓板の座屈および最終强度の 相關關係(第1報) -2軸方と剪斷を受ける場合 上田幸雄;S.M.H. Rashed;白点基
- Transactions of the Royal Intitution of Naval Architects v.132 The Design of Plate Panels Subjected to In-Plane Shear and Biaxial Compression of Naval Architects P.C. Davidson;J.C. Chapman;C.S. Smith;P.J. Dowling
- Transactions of the Royal Institution of Naval Architects v.133 The Design of Plate Panels Subject to Biaxial Compression and Lateral Pressure P.C. Davidson;J.C. Chapman;C.S. Smith;P.J. Dowling
- TAPIR Ultimate Load Analysis of Marine Structures T.H. Soreide
- The Strutural Engineer v.47 Welded Steel Plates in Compression J.B. Dwight;K.E. Moxham
- Transactions of the Royal Institution of Naval Architects v.117 Compressive Strength of Welded Steel Ship Grillage C.S. Smith
- The Structural Engineer v.58B no.3 The Collapse of Rectangular Steel Plates under Uniaxial Compression G.H. Little
- Marine Structures v.6 Simulation of the Ultimate Compressive Strength ofUnstiffened Rectangular Plates C. Guedes Soares;M. Kmiecik
- J. of Ship Research v.39 no.3 Ultimate and Crsuhing Strength of Plated Structures J.K. Paik;P.T. Pedersen
- Internation Shipbulding Progress v.43 no.434 A Simplified Method for Predicting the Ultimate Compressive Strength of Ship Panels J.K. Paik;P.T. Pedersen
- J. of Ship Research v.39 no.1 A New Concept of the Effective Shear Modulus for a Plate Buckled in Shear J.K. Paik
- Ship Structure Committee, Report No. SSC-354 Strutural Redundancy for Continous and Discrete Systems P.K. Das;J.F. Garside
- Ship Structure Committee, Report No. SSC-375 Uncertainty in Strength Models for Marine Structures O.F. Hughes;E. Nikolaidis;B. Ayyub;G. White;P. Hess
- Proc. of the 6th Int. Symp. on Practical Design of Ships and Mobile Units (PRADS`95) v.2 Benchmarking of Ultimate Strength Prediction for Longitudinally Stiffened Panels P. Rigo;T. Moan;P.A. Frieze;M. Chryssanthopoulos
- Joint PNU-ABS Research Project, Final Report to the American Bureau of Shipping, by Pusan National University A Benchmark Study of the Ultimate Strength Formulations of Stiffened Pamels J.K. Paik
- Constructional Steel Design, An International Guide Box Girders P.J. Dowling;J.E. Harding;P.J. Dowling(Ed.);J.E. Harding(Ed.);R. Bjorhoved(Ed.)
- Proc. of Int. Conf. on Steel and Aluminum Structures Towards a Better Understanding of Compression Induced Stiffener Tripping D. Faulkner;R. Narayanan(Ed.)
- Marine Structures v.1 Interactive Flexural-Torsional Buckling Behavior of Stiffened Plating P.A. Caridis
- Marne Structures v.5 Ultimate Torsional Strength of Flar-Bar Stiffeners Attached to Falt Plating under Axial compression G.D. Panagiotopoulos
- J. of Constructional Steel Research v.38 no.1 Local Buckling of Stiffened Plates in Offshore Structures N.E. Shanmugam;M. Arockiasamy
- J. of Ship Research Local Buckling of Stiffeners on Ship Plating J.K. Paik;Y.I. Park;A.K. Thayamballi
- J. of Structural Engineering v.122 no.6 Ultimate Compressive Strength of Orthogonally Stiffened Steel Plates I. Mikami;K. Niwa
- Fritz Laboratory Report No. 248.13 Ultimate Strength of Longitudinally Stiffened Plate Panels Subjected to Combined Axial and Lateral Loading J. Kondo
- Marine Structures v.8 Buckling and Ultimate Strength Interaction of Plates and Stiffened Plates under Combined Inplane Biaxial and Shearing Y. Ueda;S.M.H. Rashed;J.K. Paik
- J. of Structural Division v.103 no.ST11 Design of Axially Loaded Stiffened Plates M.R. Horne;R. Narayanan
- Proc. of Inst. of Civil Engrs. v.63 Influence on Strength of Compression Panels of Stiffener Section, Spacing and Welded Connection M.R. Horne;P. Montague;R. Narayanan
- Steel Plated Structures Compression Tests on Welded Eccentrically Stiffened Plate Panels D. Faulkner;P.J. Dowling(ed.)(et al.)
- J. of Constructional Steel Research v.28 Experimental Study of Stiffened Plates in Compression up to Collapse K. Ghavami
- 대한조선학회 논문집 v.33 no.3 판 및 보강판의 압축최종강도 실험식 백점기;이제명
- Transactions of the Society of Naval Architects and Marine Engineers v.91 Ultimate Strength of Ship Structures Y.K. Chen;L.M. Kutt;C.M. Piaszczyk;B.P. Bieniek
- Transactions of the Society of Naval Architects and Marine Engineers v.93 Evaluation of the Longitudinal Ultimate Strength of various Ship Hull Configurations L.M. Kutt;C.M. Piaszczyk;Y.K. Chen;D. Liu
- Proc. Marine Structural Inspection, Maintenance, and Monitoring Symposium Ultimate Hull Girder Strength Margins in Present Class Requirements S. Valsgaard;E. Steen
- Proc. of Int. Symp. on Practical Design in Shipbuilding Influence of Local Compressive Failure of Ultimate Longitudinal Strength of a Ship`s Hull C.S. Smith
- J. of the Society of Naval Architects of Japan v.170 Progressive Collapse Analysis of a Ship's Hull under Longitudinal Bending T. Yao;P.I. Nikolov
- Proc. SNAME Spring Meeting Hull Girder Response to Extreme Bending Moments D.W. Billingsley
- Proc. SSC/SNAME sym. on Extreme Loads Response Evaluation of Ultimate Ship Hull Strength R.S. Dow;R.C. Hugill;J.D. Clarke;C.S. Smith
- DTNSRDC Report 82/076 ULSTR: A Program for Estimating the Collapse Moment of a Ship`s Hull under Longitudinal Bending J.C. Adamchak
- Transactions of the Society of Naval Architects and Marine Engineers v.98 Ultimate Longitudinal Strength of Ships: A Case Study S.E. Rutherford;J.B. Caldwell
- J. of Ship Research v.40 no.1 Approximate Assessment of the Ultimate Longitudinal Strength of the Hull Girder J.M. Gordo;C. Gruedes Soares;D. Faulkner
- J. of Ship Research v.40 no.3 Estimation of Ultimate Longitudinal Bending Moment of Ships and Box Girders M.K. Rahman;M. Chowdhury
- PhD. Thesis, Department of Naval Architecture and Offshore Engineering, Technical University of Denmark Reliability Methods for the Longitudinal Strength of Ships A.M. Hansen
- Proc. of Int. Symp. on Practical Ships and Mobile Units(PRADS`95) Collapse of Ship Hulls under Combined Vertical and Horizontal Bending Moments J.M. Gordo;C. Guedes Soares
- J. of the Society of Naval Architects of Japan v.172 Progressive Collapse Analysis of a Ship`s Hull under Longitudinal Bending (2nd Report) T. Yao;P.I. Nikolov
- J. of the Society of Naval Architects of Japan v.156 Plate and Stiffened Plate Units of the Idealized Structural Unit Method (1st Report) Y. Ueda;S.M.H. Rashed;J.K. Paik
- J. of the Society of Naval Architects of Japan v.160 Plate and Stiffened Plate Units of the Idealized Structural Unit Method (2nd Reprot) Y. Ueda;S.M.H. Rashed;J.K. Paik
- PhD. Thesis. Department of Ocean Engineering, Technical Unuversity of Denmark Hull Girder Collapse E. Bendiksen
- Marine Structures v.6 Collapse Analysis of Ship Hulls Y. Bai;E. Bendiksen;P.T. Pedersen
- J. of Ship Research v.38 no.3 Tensile Behavior of Local Members on Ship Hull Collapse J.K. Paik
- Proc. RINA Spring Meeting Structural Design by Analysis Approach Applied to Product Oil Carrier with Unidirectional Girder System T. Hori;M. Sekihama;S.M.H. Rashed
- J. of the Society of Naval Architects of Japan v.169 Ultimate Longitudinal Strength-Based Safety and Reliability Assessment of Ship`s Hull Girder (2nd Report)-Stiffened Hull Structure- J.K. Paik
- Proc. of the Int. Symp. on Practical Design of Ships and Mobile Units (PRASDS`95) Ultimate Strength of Ships under Combined Vertical and Horizontal Moments A.E. Mansour;Y.H. Lin;J.K. Paik
- Transactions of the Society of Naval Architects and Marine Engineers v.104 Ultimate Strength of Ship Hulls unde Combined Vertical Bending, Horizontal Bending, and Shearing Forces J.K. Paik;A.K. Thayamballi;J.S. Che
- International Shipbuilding Progress v.36 no.408 An Assesment of the Structural Capacity of Damaged Ships: The Plastic Approach in Longitudinal Unsymmetrical Bending and the Influence of Buckling M. Maestro;A. Marino
- Proc. of Int. Conf. on Steel Box Girder Bridges Experimental and Predicted Collapse Behaviour of Rectangular Steel Box Girders P.J. Dowling;S. Chatterjee;P.A. Frieze;F.M. Moolani
- Int. Congress on Steel Plated Structures The Effect of Shear Lag on the Ultimate Strength Box Girders P.J. Dowling;F.M. Moolani;P.A. Frieze
- J. of the Society of Naval Architects of Japan v.154 Analysis of Ultimate Strength of Stiffened Rectangular Plates S. Nishihara
- Proc. of SSC/SNAME Symp. on Extreme Loads Response Strength of Ship Hull Girders under Moment Shear and Torque A. Ostapenko
- Transactions of the Society of Naval Architects and Marine Engineers v.98 An Experimental Investigation on Ship Hull Ultimate Strength A.E. Mansour;J.M. Yang;A.K. Thayamballi
- Proc. of Int. Conf. on Advamces in Marine Structures Testing and Analysis of a 1/3-Scale Welded Steel Frigate Model R.S. Dow;C.S. Smith(Ed.);R.S. Dow(Ed.)
- Transactions of the Royal Institution of Naval Architects v.107 Ultimate Longitudinal Strength J.B. Caldwell
- Transactions of the Royal Institution of Naval Architects v.115 On Applying the Statistical Approach to Extreme Sea Loads and Ship Hull Strength A.E. Mansour;D. Faulker
- Proc. of Int. Conf. on Advances in Marine Structures, Admiralty Research Establishment Development of Ship Strength Formulations A.C. Viner
- Thransactions of the Royal Institution of Naval Architects v.121 Toward a Unified Approach to Ship Structural Safety D. Faulkner;J.A. Sadden
- Proc. of Marine Sturctural Inspection, Maintenance, and Monitoring Symposium Ship Longitudinal Strength Modeling for Reliability Analysis P.A. Frieze;Y.T. Lin
- J. of Marine Science and Technology v.1 no.1 A Simple Formulation for Predicting the Ultimate Strength of Ships J.K. Paik;A.E. Mansour
- Transactions of the Royal Institution of Naval Architects v.139 Ultimate Strength Reliability of Corroded Ship Hulls J.K. Paik;S.K. Kim;S.H. Yang;A.K. Thayamballi
- J. of Ship Research Ultimate Hull Girder Strength Reliability of Corroded Bulk Carriers J.K. Paik;S.K. Kim;S.K. Lee;A.K. Thayamballi
- Ship Structure Committee, Report No. SSC-381 Residual Strength of Damaged Marine Structures D.J. Ghose;N.S. Nappi;C.J. Wiernicki
- Ship Structure Committee, Report No. SSC-299 Ultimate Strength of a Ship`s Hull Girder in Plastic and Buckling Modes A.E. Mansour
- 日本造船學會論文集 no.160 矩形および防撓板の理想化構造要素の開發 -初期たわみと熔接 殘留應力お有し, 面內荷重と橫荷重を受ける場合 上田幸雄;S.M.H. Rashed;白点基
- 西部造船會會報 no.93 組み合せ面內荷重を受ける矩型板の座屈 最終强度に關する硏究 藤久保昌彦;矢尾哲也;B. Varghese
- 西部造船會會報 no.93 表層超細粒鋼板座屈 塑性崩壞强度特性關一考察 山本元道;矢尾哲也(他)
- 日本造船學會論文集 no.154 熔接初期不整を有する矩型板の壓壞强度に關する硏究(第3報) -複雜な初期たわみを有する矩型板の壓壞强度の推定法 上田幸雄;矢尾哲也;中長啓治;田中義照;半田和久
- 東京大學 工學博士論文 板構造物の最終强度に關する硏究 仁保治
- 大阪大學 工學博士學位論文 船體構造部材の壓壞强度に關する硏究 矢尾哲也
- 大阪大學 工學博士學位論文 壓縮力を受ける鋼板および補强板の極限强度に關する硏究 北田俊行
- 日本造船學會論文集 no.175 防撓パネルの壓壞擧動に關する硏究(第1報) 矢尾哲也;藤久保昌彦;柳原大輔;大野禎久
- 日本造船學會論文集 no.164 防撓材の局部座屈を伴う防撓板の壓縮强度 田中義照;遠藤久芳
- Transactions of the Society of Naval Architects and Marine Engineers v.100 Deterministic and Probabilistic Safety Evaluation for a New Double-Hull Tanker with Transverseless System J.K. Paik;D.H. Kim;H.S. Bong;M.S. Kim;S.K. Han
- Transactions of the Royal Institution of Naval Architects v.136 Hull Collapse of an Aging Bulk Carrier under Combined Longitudinal Bending and Shearing Force J.K. Paik