The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers (한국조명전기설비학회지:조명전기설비)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지

Cost Estimation and Economical Efficiency Analysis of Impulse Magnetizer using Semiconductor Switching Device

반도체 스위칭 소자를 이용한 임펄스 착자기의 비용 산정 및 경제성 분석

  • Published : 1997.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

A capacitor discharge impulse magnetizer using semiconductor switching device is used to produce a high current impulse of short duration in a magnetizing fixture for magnets of the various shapes. The price of today's magnetizer is relatively expensive. This paper described a method for cost estimation of capacitor discharge impulse magnetizer using semiconductor switching device and the economical efficiency analysis. We used a cost structure consisted of five major subsystems. Especially, we estimated the potential for a cost reductions in impulse magnetizer as a function of time using the learning curve, and the potentials of cost by depreciation. The reliable results were obtained by using iron-core fixture coupled to a middle-voltage magnetizer.

반도체 스위칭소자를 이용한 커패시터 방전 임펄스 착자기는 착자요크에 순간적인 고전류 임펄스를 방전시켜 여러 종류의 영구자석을 생산하는데 사용된다. 요즈음 이러한 착자기의 비용은 상당히 고가이다. 본 연구에서는 반도체 스위칭 소자를 이용한 커패시터 방전 임펄스 착자기의 비용산정을 위한 방법 및 그 경제적 분석에 대하여 제시하였다. 이를 위하여 5개의 부시스템으로 구성되는 비용 구조를 이용하였다. 특히 Learning Curve를 이용한 임펄스 착자기의 비용감소 및 평가절하에 의한 비용의 변동추이를 관찰하였다. 중용량 착자기와 연결된 철심요크 (브러시레스 직류모터의 8극 회전자 자석용)를 이용하여 신뢰할 수 있는 결과를 얻었다.

Keywords

References

  1. Proceedings of the International Symposium on Power Electronics(ISPE' 92) Computer Simulation of a Capacitor Impulse Discharging Circuit Pill-Soo Kim(et al.)
  2. IEEE Trans. on Magnetics v.26 no.5 Simulation of Capacitor Discharge Magnetisation G.W.Jewell(et al.)
  3. Proceeding of the 5th International Energy Conference (ENERGEX'93) Design and Analysis of Capacitor Discharge Impulse Magnetizer-Magnetizing Fixture System Pill-Soo Kim (et al.)
  4. IEEE Trans. on Magnetics v.MAG-22 no.5 Numerical Analysis of Transient Magnetic Field in a Capacitor-Discharge Impulse Magnetizer T.Nakata;N.Takahashi
  5. IEEE Trans. on Magnetics v.24 no.5 The Analysis of a Magnetizing Fixture for a Multipole Nd-Fe-B Magnet J. Kelly Lee
  6. Proceedings of the International Power Electronics Conference (IPEC'95) Thermal Modeling of Capacitor Discharge Impulse Magnetizing Fixture System Pilk-Soo Kim (et al.)
  7. Trans. IEE of Japan v.116-D no.4 Thermal Modeling of Capacitor Discharge Impulse Magnetizer Pill-Soo Kim;Yong Kim
  8. Proceedings of the International Conference on Power Electronics (ICPE'95) Cost Reduction Estimation of Impurse Magnetizer System using the Learning Curve Pil-Soo Kim(et al.)
  9. Proceedings of the International Conference on Industrial Electronics, Control and Instrumentation (IECON'96) A Future Cost Trends of Magnetizer Systems Pill-Soo Kim;Yong Kim
  10. IEEE Trans. on Energy Conversion v.9 no.2 Small Technology and Cost Reduction Estimates S. M. Schoenung (et al)
  11. IEEE Spectrum Using the Learning Curve as a Management Tool J.A.Cunningham
  12. Proceedings of the International Conference on Electricl Machines (ICEM'94) A Techno-Economic Study of High Tc Superconducting Power Transformers Mumford,F.J.(et al.)
  13. IEEE Trans. on Ind. Appl. v.30 no.6 The Impact of Efficiency on the Economics of New Motor Purchase, Mortor Repair, and Motor Replacement D. M. Brethaner (et al.)
  14. IEEE Trans. on Ind. Appl. v.30 no.6 The Impact of Efficiency on the Economics of New Motor Purchase, Motor Repair, and Motor Replacement D.M.Brethaner(et al.)