초록
국내에서 가정용 보일러에 사용되고 있는 기존의 순환펌프는 캔(canned)형 순환펌프로서 거의 수입에 의존하고 있는 실정이며, 이것은 고정자와 회전자의 간격이 넓어 효율이 떨어지고, 또한 여름철 비가동시에는 캔과 회전자 사이가 고착되어 초기가동이 불가능하게 됨으로서 펌프의 수명을 단축시키는 단점을 가지고 있다. 따라서 본 연구에서는 이러한 단점들을 극복하고 기존의 순화펌프의 개념을 완전히 탈피한 평면대향형 브러시리스 전동기에 의한 전자식 순환펌프를 개발하고자 한다. 개발된 전자식 순화펌프는 실험을 통하여 기존의 캔형 순환펌프보다 크기 및 소음의 축소, 원가절감, 효율의 향상 등 이점을 가지고 있음을 보였다.
Canned type household circulating pump in the country almost depends on the act of imports, however it has disadvantage of low efficiency because an airgap of between rotor and stator is large and when the boiler is not used in a period of summer, a can and a rotor become adhered each other. Accordingly the pump is impossible to drive the initial state, and a lifetime of the pump gets shortening. To overcome these defects a electronic circulating pump by axial air-gap type brushless motor which is completely depart from the general idea for the conventional pump is developed. This paper is verified through experiments that the developed pump has good performance for reduction of size and noise, reo trenchment of cost, and improvement of efficiency in comparison with the conventional pump.