Abstract
Perovskite $BaTiO_3$ thin films on stainless steel substrate were prepared by using electrochemical reduction method in solution of $TiCl_4\;and\;Ba(N0_3)_2$. According to current density and electrolysis time. the morphology and thickness of film were varied. Ra/'Ti atomic ratio in $BaTiO_3$ film was controlled by Ha/Ti atomic ratio in solution. Although the excess $TiO_2{\cdot}nH_2O$ film was coated in initial stage of electrolysis. UiilTi atomic ratio in film was nearly constant in later stage. $BaTiO_3$ film precursor was obtained under the condition of $1OmA/cm^2$ current density and Smin electrolysis time. $BaTiO_2$ thin films with perovskite phase were formed 11,. the heat treatment above $500^{\circ}$.
$Ba(NO_{3})_{2}$와 $TiCl_{4}$의 혼합 수용액으로부터 전기화학법 중 음극혼원법(cathodic reduction method)을 이용하여 stainless steel기판 위에 $BaTiO_{3}$박막을 제조하였다. $BaTiO_{3}$전구체 박막은 혼합 수용액으로부터 반응초기에 $TiO_{2}{\cdot}nH_{2}O$M/형태로 우선적으로 형성되었으며, 일정 시간이 경과한 후에는 일정한 Ba/Ti몰비를 갖는 박막이 제조되었다. $BaTiO_{3}$박막 내 Ba/Ti조성비는 혼합 수용액 내에 존재하는 이온 조성비 $Ba^{2+}/Ti_{4+}$에 변화하였는데, 0.3M $Ba(NO_{3})_{2}$와 0.1M $TiCI_{4}$의 혼합 수용액과 $10mA/cm^2$의 전류를 흘려주는 조건에서 Ba/Ti의 조성비가 1에 가까운 박막을 얻을 수 있었다. 이러한 전구체 박막을 $500^{\circ}C$이상에서 열처리한 결고 페로브스카이트 상의 $BaTiO_{3}$박막이 제조되었다.