쑥을 이용한 천연염색에 관한 연구

The Study on Natural Dyeing with Artemisia

Recently the interest in natural dyeing has been increased because of the color clarity, natural grace and reactionism in fashion. Indigo dyeing, safflower dyeing and Gal-ott in Cheju-Do become generally known, so the study about the natural dyeing is continued with national intrust and support. In this study, 1 used artemisia for various dyeing tests because we can get it easily. 1 tested the dyeability in wool as well as cotton and silk with wormwood in natural dyeing material. I also dyed nylon with the same material for the comparison of the molecular structure. The mercerization and the chitosan treatment were done in cotton to improve the low dyeability in the natural dyeing. The result of this study are as follows; We have to dye repeatedly to get deep color in natural dyeing, and mordant treatment brought good result in color difference and dyeing fastness. 1. Compared with silk, wool and nylon, the dyeability of cotton was the worse. The color difference of cotton was 18.81 without mordants , and 24.05 with mordant. The dyeability of cotton was much increased by mordants such as potassiumdichromate, copper sulfate, iron sulfate and salt water. The color of cotton was turned into yellow-green in potassium dichromate and yellow-green with deep green in copper sulfate. The mercerization and the chitosan treatment of cotton made the improvement in color, dyeability, laundering fastness, abrasion fastness. 2. The color difference of silk was 3 times as high as cotton. It showed the similar degree with the chitosan treated-cotton. That is to say, silk had good dyeability because it contains amino group and carboxyl group. The dyebility of silk was increased by a mordant such as iron sulfate, potassium dichromate and salt water, Drycleaning fastness showed 5 grade, abrasion-fastness was high over 4~5 grade and sunlight fastness showed 1 grade in all case. 3. The color difference of wool was the best among four fabrics because of 18 kinds of amino acids. It is considered that the sulfate of wool has the polarity and help metal- mordants get the better dyeability such as potassium dichromate, iron sulfate, copper sulfate, and aluminum chloride. The color was reddish-green in potassium dichromate, yellow.greenin iron sulfate and copper sulfate, and yellow in the rest mordants. Drycleaning fastness of wool showed over 4~5 grade, abrasion fastness 5 grade. Sunlight-fastness 1 grade. 4. The dyeability of nylon was almost same because of the similar molecular structure with silk. The clarity of color was poor. The color was yellow-green in copper sulfate and yellow in the rest mordants. Laundering fastness and abrasion-fastness of nylon was good. Sunlight- fastness represented 1 grade.