The Korean Journal of Ceramics

한국세라믹학회 (The Korean Ceramic Society)
권호 표지

Tribological Behaviour of the Si/SiC and the Si/SiC/Graphite Composites

  • Kim, In-Sub (National Institute of Ceramic Technology) ;
  • Shin, Dong-Woo (Gyeongsang National University, Department of Inorganic Maerials Engineering) ;
  • So, You-Young (Myung Ji University, Department of Inorganic Materials Engineering) ;
  • Lee, Byung-Ha (Myung Ji University, Department of Inorganic Materials Engineering)
  • 발행 : 1997.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The dense sintered bodies of Si/SiC composite with various Si contents could be fabricated by changing the green density in the forming process. The Si/SiC/graphite composites with various graphite contents could be also fabricated by changing a graphite content in the starting composition. Their mechanical and tribological properties were characterized and wear mechanism was also studided. The hardness and strength of the Si/SiC and the Si/SiC/graphite were decreased with increasing the contents of free Si and graphite, respectively. However, the friction coefficient and specific wear rate had no specific relations to their hardness and strength. Adhesion of free Si was a main factor to determine a wear resistance of the Si/SiC composite. In the case of the Si/SiC/graphite, solid lubricationl and liquid reservoir of the graphite particles played the main role of the reduction of the friction force. In the torque test to estimate the possibility of practical of practical applications, the value of torque between the Al2O3 disk and Si/SiC/graphite disk was 1/6 lower compared with two $Al_2O_3$ disks on the basis of 100,000 cycles.

키워드

참고문헌

  1. J. Mat. Sci v.13 Microstucture Characterization of :"REFEL" (Reaction-Bonded) Silicon Carbides G. R. Sawyer;T. F. Page
  2. Am. Ceram. Soc. Bull. v.57 no.8 Development and Processing of Injection-Moldable Reaction-sintered SiC Compositions P. A. Willerment;R. A. Pettand;J. J. Whalen
  3. Academic Press INC. v.29 Structural Ceramics B. John;J. Wachtman
  4. Special Ceramics The Preparation of Dense Self-Bonded Silicon Carbide P. Popper
  5. Ceram. Bull. v.54 no.12 Silicon/Silicon Silicon Carbide Composites W. B. Hilling;R.L. Mehan;C. R. Morelock;V. J. Decarlo;W. Laskow
  6. Special Ceramics v.5 The Fabrication and Properties of Self-Boned silicon Carbide Bodies C. W. Forrest;P. Kennedy;J. V. Shenann
  7. Adv. Ceram. Mater. v.3 Transport of Fine-Grained βSiC in SiC/Liquid Si System C. B. Lim.;T. Lseki
  8. YogyoKyokai-Shi v.93 no.10 Mechanical and Tribological Properties of Si₃N₄-BN Composite Ceramics M. Iwasa;S. Kakiuchi
  9. Industrial Lubrication and Tribology v.33 no.4 Self-Lubricating Bearings D. C. Evans
  10. J. Kor. Ceram. Soc. v.30 no.1 Properties of Reaction-Bonded Silicon Carbide Depending on Graphite Additions I. S. Han;J. H. Yang;D. S. Suhr
  11. J. Ceram. Soc. Japn v.97 no.2 Wear Behaviour of silicon Nitride Ball M. Iwasa;M. Kinoshita
  12. Presented at Fall Meeting of Basic Science Dividion of American Ceramic Society v.November The Effect of Microstructure on the mechanical Properties of Reaction-Sintered Silicon Carbide M. Shinivasan;M. Kasprzyk
  13. Powder Metall. v.8 Friction Deformation and Fracture of single Crystal Silicon Carbide K. Miyoshi;D. H. Buckley
  14. Wear v.67 no.3 The Generation and Morphology of Single Crystal Silicon Carbide Wear Particles under Adhesive Conditions K. Miyoshi;D. H. Buckley