송출 및 권취 장력제어 시스템 개발에 관한 연구(I) -주파수 응답법에 의한 동특성 해석-

Frequency Response Analysis of the Let-off Mechanism Driven by an Individual Motor

  • 허유 (경희대학교 공과대학 섬유공학과) ;
  • 문승룡 (경희대학교 공과대학 섬유공학과) ;
  • 장승호 (경희대학교 공과대학 섬유공학과) ;
  • 이석규 (영남대학교 공과대학 전기공학과)
  • Huh, You (Department of Textile ENGINEERING, Kyung Hee University) ;
  • Moon, Seung-Ryong (Department of Textile ENGINEERING, Kyung Hee University) ;
  • Jang, Seung-Ho (Department of Textile ENGINEERING, Kyung Hee University) ;
  • Lee, Suck-Gyu (Department of Electrical Engineering, Young Nam University)
  • 발행 : 1997.03.01

초록

The variation of the warp yarn tension in the weaving process causes the irregularity of the weft density of woven fabrics. In particular, the warp yarn tension varies to a great extent when the take-up speed, the let-off speed do not coincide. Therefore it is necessary to maintain the warp yarn tension constant by controlling the let-off speed, considering the take-up speed and warp beam diameter. In general, it is indispensable to know the dynnamic characteristics in order to control a system optimally. Here, the dynamic characteristics of the let-off/take-up process were studied experimentally, using the frequency response method. For the weaving machine developed for this study, the let-off system was driven by a servo-motor. The warp yarn tension was measured by the backrest movement which was in the state of equilibrium with the loading force of a spring. A load cell was connected to the spring. From the experiments it was observed that the test process, namely the interval between the let-off system and the warp yarn tension measurement, had the dynamic characteristics of an integral system and the warp yarn tension could be measured by the movement of the backrest loaded by a spring.

키워드

참고문헌

  1. JTN Innovations in Weaving Machinery the course of loom development T. Ishida
  2. T.R.J. Weaving Processes-Effects of Non-Preemptive Priority and Operator Interference on Output W. W. Hines;A. W. Nass;R. K. Flege
  3. T.R.J. Effect of Different Let-off Mechanisms on Fabric Formation and Dimension of Fabric in the Loom A. K. Basu
  4. Melliand Textilberichte v.67 Welche Vorteile bieten electronisch gesteuerte Kettablassvorrichtungen in der Filamentgarnweberei? S. Schlichter;J. Luenenschloss
  5. J. of Kor. Fiber Soc. v.27 A Study on the Tension Variation of Warp Yarn Group as a Process Parameter in Accordance with the Initial Loading Y. Huh
  6. Melliand Textilberichte v.68 Einfluss verschiedener Maschinen- und Materialparameter auf Regeleigenschaften und Warenausfall beim Einsatz elektronisch gesteuerter Kettablassvorrichtung an Filamentgarnwebmaschinen S. Schlichter;J. Luenenschloss
  7. Melliand Textilberichte v.71 Beurteilung von Massnahmen zur Vermeidung von Anlaufstellen in Geweben B. Wulfhorst;B. Obolenski
  8. J. of Korean Fiber Soc. v.31 Effect of Starting up conditions on the Product Quality in the Weaving Process Y. Huh;S. T. Lee;W. Y. Ryu;J. L. Woo
  9. MTL/TT/9 Weaving: Control of Fabric Structure K. Greenwood
  10. System Dynamics(2nd Ed.) K. Ogata