ETRI Journal

  • 제19권2호
  • /
  • Pages.59-70
  • /
  • 1997
  • /
  • 1225-6463(pISSN)
  • /
  • 2233-7326(eISSN)
한국전자통신연구원 (Electronics and Telecommunications Research Institute)
권호 표지

A Study on Thermal Performance of Heat Pipe for Optimum Placement of Satellite Equipment

  • 발행 : 1997.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A study on the operation of a heat pipe with two heat sources has been performed to optimize the heat distribution of satellite equipment. A numerical modeling is used to predict the temperature profile for the heat pipe assuming cylindrical two-dimensional laminar flow for the vapor, and the conduction heat transfer for the wall and wick. An experimental study using the copper-water heat pipe with the length of 0.45 m has been performed to evaluate the numerical model and to compare the temperature distribution at the outer wall for the non-uniform heat distribution. The results on temperature profiles for the heat input range from 29 W to 47 W on each heater are presented. Also the correlation between the heat input and the temperature increase is presented for the optimum distribution on two heaters. The result shows that the outer wall temperature can be controlled by redistribution of heat sources. It is also concluded that the heat source closer to the condenser can carry more heat while maintaining lower temperatures at the outer wall.

키워드

참고문헌

  1. Heat Recovery Systems and CHP v.9 no.1 Heat pipe research and development in the Americas Doran, F.
  2. Paper S-1-3, 4th International Heat Pipe Symposium An experimental study on a plate type two-phase closed thermosyphon Lee, Y.;Pioro, I.;Park, H.J.
  3. AIAA/ASME 4th Joint Thermophysics and Heat Transfer Conference, AIAA-86-1360 Analysis and performance evaluation of heat pipes with multiple heat sources Gernert, N.J.
  4. Journal of Heat Transfer v.113 Experimental and numerical analysis of low-temperature heat pipes with multiple heat sources Faghri, A.;Buchko, M.
  5. Journal of Heat Transfer v.112 Mathematical modeling and analysis of heat pipe start-up from the frozen state Jang, J.H.;Faghri, A.;Chang, W.S.;Mahefkey, E.T.
  6. Numerical Heat Transfer v.18 Transient two-dimensional compressible analysis for high temperature heat pipes with a pulsed heat input Cao, Y.;Faghri, A.
  7. ASME HTD-Vol. 329, National Heat Transfer Conference v.7 A numerical study on the heat pipe with switched heat source and sink for space application Park, J.H.;Lee, J.H.
  8. Int. Journal of Heat Mass Transfer v.33 no.9 An analysis of the vapor flow and the heat conduction through the liquid-wick and pipe wall in a heat pipe with single or multiple heat source Chen, M.M.;Faghri, A.
  9. Proc. of 25th ASME national Heat Transfer Conference v.1 Transient compressible heat-pipe vapor dynamics Bowman, W.J.;Hitchcock, J.
  10. Heat Pipes Dunn, P.D.;Reay, D.A.
  11. Basic concepts of heat transfer;Handbook of Heat Transfer Fundamentals Ganic, E.N.;Hartnett, J.P.;Rohsenow, W.M.;Rohsenow(et al.)(ed.)
  12. Heat Pipe Science and Technology Faghri, A.
  13. Phoenics Training Course Notes CHAM TR/300 Rosten, H.I.;Spalding, D.B.
  14. Trans. of KSME v.17 no.3 Development of a computer code for the performance analysis and design of low-temperature heat pipes having screen wick Boo, J.H.;Jin, S.H.