초록
일반적으로 합성형 교량에 있어서 강판형과 콘크리트 슬래브 사이의 일체성은 강재와 콘크리트라는 이질재료의 접합부 사이에 위치한 전단연결재의 강성과 배치간격에 의해 영향을 받게 된다. 따라서 전단연결재는 두 재료가 일체로 거동할 수 있도록 충분한 강성을 가져야만 하며, 강성이 부족하게 되면 접촉면에서 미끄러짐이 발생한다. 이때, 미끄러짐의 발생을 고려한 것을 불완전합성형이라 한다. 본 논문에서는 불완전합성형의 해석에서 복잡한 계산과정을 거치지 않고 불완전율에 따라서 전단연결재의 강성과 간격을 산정하는 간이추정법에 대하여 연구하였으며, 단면과 지간에 따른 형특성, 불완전율, 하중작용점에 따라서 전단연결재에 작용하는 수평전단력, 축력 등의 변화양상을 간단한 영향선으로 나타내었다. 또한, 해석 예로서 Newmark의 partial interaction theory이론을 기초로 한 블완전합성형의 기초미분방정식을 적용하여 불완전율에 따라서 1) 스프링상수와의 관계 2) 축력 및 수평전단력과의 관계 3) 응력 및 중립축과의 관계를 고찰하였다.
Generally, in a steel-concrete composite gilder, the shear connector which was constructed between concrete deck and steel girder should have enough stiffness to behave as one body, because the conformity between plate and concrete deck is influences by the stiffness and spacing of the shear connectors. If the stiffness of shear connectors are insufficient, slip would happen at the contact surface. Partial interaction is the case that takes account of slips. In this paper, an easy method is presented to evaluate the stiffness or spacing of the shear connector according to the degree of imperfection without difficult calculations for a composite gilder with partial interaction. Also, the horizontal shearing force applied to the shear connector and the longitudinal axial force, which is occurs at contact surface between concrete deck and steel girder, have been presented in a simple influence line that is various to the parameters of sectional properties, degree of imperfection and applied load points. Furthermore, through the case study, it determined the relationships between the degree of imperfection and the follows 1) spring constants 2) axial force and horizontal shearing force 3) stress and neutral axis by using the partial differential equation based on Newmark's Partial Interaction Theory.