Journal of the Korean Institute of Gas (한국가스학회지)
- Volume 1 Issue 1
- /
- Pages.21-26
- /
- 1997
- /
- 1226-8402(pISSN)
- /
- 2713-6922(eISSN)
Numerical Analysis on the Stress Behaviours Due to Geometry Effects of the Membrane Corrugation
멤브레인의 주름 형상이 응력거동에 미치는 영향에 관한 수치적 해석
- Kim Chung-Kyun (Tribology Research Center) ;
- Lee Young-Suck (Tribology Research Center) ;
- Cha Baeg-Soon (Tribology Research Center) ;
- Kim Young-Gyu (Korea Gas Safety Co.) ;
- Yoon In Soo (Korea Gas Co.) ;
- Hong Seong Ho (Korea Gas Co.)
- 김청균 (홍익대학교 트라이볼로지 연구센터) ;
- 이영숙 (홍익대학교 트라이볼로지 연구센터) ;
- 차백순 (홍익대학교 트라이볼로지 연구센터) ;
- 김영규 (한국가스안전공사) ;
- 윤인수 (한국가스공사) ;
- 홍성호 (한국가스공사)
- Published : 1997.12.01
Abstract
This paper presents the numerical results of six corrugation models which compute the stress behaviours and stress levels of the membrane structure under the hydrostatic pressure of cryogenic liquids and thermal loadings using a non -linear finite element analysis program. A three-dimensional analysis of various corrugation geometries was performed on the maximum mean normal stress distributions along the upper surface of the membrane sheet. Comparisons of the FEM results for various geometry models of the corrugation are presented, which shows that the corrugated configuration of the ring knot model can be effectively performed for the combined forces such as the hydrostatic pressure and thermal loading in comparison with the Technigaz type corrugation which has small comer and apex curvatures. The FEM results show that the ring knot corrugation can be used for the deepest depth, 180m of the LNG storage tank in comparison with other corrugation models.
본 논문에서는 비선형 유한요소해석 프로그램을 이용하여 초저온 액체에 의한 정압과 열하중을 받는 멤브레인 구조물의 응력기동과 응력수준을 6가지 주름모델에 대한 수치적 해석결과를 제시하였다. 맴브레인 판재의 상면을 따라 최대 평균법선 응력분포에 관한 여러 가지 기하학적 주름의 3차원 해석을 수행하였고, 이들 주름형상에 대한 유한요소해석 결과를 비교