Radiation-Induced Grafting of Acrylic Acid onto Polypropylene Fabric in the Presence of Metallic Salt

폴리프로필렌 부직포에 아크릴산의 방사선 그라프트 반응에서 금속염의 효과

  • Nho, Young Chang (Radiation Processing Project, Korea Atomic Energy Research Institute) ;
  • Park, Jong Shin (Radiation Processing Project, Korea Atomic Energy Research Institute) ;
  • Jin, Joon-Ha (Radiation Processing Project, Korea Atomic Energy Research Institute)
  • 노영창 (한국원자력연구소 방사선가공기술개발) ;
  • 박종신 (한국원자력연구소 방사선가공기술개발) ;
  • 진준하 (한국원자력연구소 방사선가공기술개발)
  • Received : 1996.06.11
  • Accepted : 1996.08.12
  • Published : 1996.10.10

Abstract

The effect of absorbed dose, dose rate, cationic salts and solvent on the grafting yield was evaluated when acrylic acid was grafted onto polypropylene fabric by simultaneous irradiation process. Low dose rate when irradiated with the same absorbed dose led to a high grafting yield. On the other hand, the grafting yield increased with dose rate in case the total irradiation times is equal, and the initial rate of grafting was found to be proportional to be 0.74 power of dose rate. $FeSO_4{\cdot}7H_2O$ was found to be the most effective additive for high grafting yield, while inhibiting homopolymer formation. It was impossible to induce radiation grafting without the addition of the certain amount of salt, but the grafting yield decreased with increasing metallic salt.

동시조사법에 의한 아크릴산의 폴리프로필렌 부직포에 대한 그라프트 반응에서 조사량, 조사선량률, 금속염 및 용매가 그라프트 반응에 미치는 영향을 조사하였다. 같은 조사선량에서는 선량률이 낮을수록 높은 그라프트율을 나타냈다. 한편 조사선량률을 달리하여 일정 시간 동안 그라프트 반응시키면 조사선량률이 높을수록 그라프트율은 높았으며, 첨가한 금속염의 종류에 관계없이 그라프트 속도는 조사선량률의 0.74 차수에 비례하였다. 사용한 금속염 중에서 $FeSO_4{\cdot}7H_2O$가 가장 우수하였으며, 첨가제의 함량이 증가하면 할수록 그라프트율은 감소하였지만 적정농도이하에서는 그라프트용액이 고화되어 그라프트 반응시킬 수 없었다.

Keywords

References

  1. Chem. Soc. Japan v.12 T. Hori;K. Saito;S. Frusaki;T. Sugo;J. Okamoto
  2. J. Membrane Sci. v.58 S. Tsuneda;K. Saito;S. Furusaki
  3. J. Appl. Polym. Sci. v.30 J. Okamoto;T. Sugo;A. Katakai;H. Omichi
  4. J. Appl. Polym. Sci. v.51 Y. C. Nho;T. Sugo;S. Tsuneda;K. Makuuchi
  5. 5th International Conference on Radiation Curing Y. C. Nho;J. H. Jin
  6. J. Appl. Polym. Sci. v.30 G. H. Hsiue;W. K. Huang
  7. J. Polym. Sci. Polym. Chem. v.31 Y. C. Nho;J. L. Garnett;P. A. Dworjanyn
  8. J. Polym. Sci. Polym. Chem. v.30 Y. C. Nho;J. L. Garnett;P. A. Dworjanyn
  9. Am. Chem. Soc. Symposium Series v.527 P. A. Dworjanyn;J. L. Garnett;M. A. Long;Y. C. Nho;M. A. Khan
  10. Rad. Phys. Chem. v.15 J. P. Lawler;A. Charlesby
  11. J. Appl. Polym. Sci. v.41 I. K. Mehta;S. Kumar;G. S. Chauhan;B. N. Misra
  12. J. Appl. Polym. Sci. v.47 G. K. Kostov;A. N. Atanassov
  13. Discussions Faraday Soc. v.29 E. Collinson;F. S. Dainton;D. R. Smith;G. J. Trudel;S. Tazuke