Journal of the Korean Society for Precision Engineering (한국정밀공학회지)
- Volume 13 Issue 2
- /
- Pages.48-61
- /
- 1996
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
Experimental Study on the Chatter Vibration at the Early Stands in Hot Strip Finishing Mills
열간 마무리 압연기 전단 스탠드의 채터 진동에 관한 실험적 연구
- Published : 1996.02.01
Abstract
In the hot strip mill, not only the chatter vibration of finishing stands has a great influence on the surface quality of hot products, but also that is the major factors to shorten the life of rolling mill housings or to create the machine troubles. As long as the mill has been operating, the low frequency chatter at the early mill stands (No.2 and No.3) of POSCO's Kwangyang No.2 hot strip mill had been detected when rolling certain types of products, e.g., thinner gage, hard grade products. For several years, the experimental study was undertaken to analyze the cause of the chatter vibration and establish the methods to avoid the vibration to acceptable levels. The analysis and solution to the vibration problem with recommendations and revised maintenance practice are the subjects of this article.