청정기술 (Clean Technology)
- 제2권1호
- /
- Pages.80-95
- /
- 1996
- /
- 1598-9712(pISSN)
- /
- 2288-0690(eISSN)
Spray Dryer Absorber 배연탈황공정의 모델 개발
Model Development of Spray Dryer Absorber FGD Process
- 장순희 (중앙대학교 공과대학 화학공학과) ;
- 오의경 (중앙대학교 공과대학 화학공학과) ;
- 이형근 (한국에너지기술연구소 에너지환경연구단) ;
- 김선근 (중앙대학교 공과대학 화학공학과)
- Jang, Sun-Hee (Department of Chemical Engineering, Chung Ang University) ;
- Oh, Eui-Kyung (Department of Chemical Engineering, Chung Ang University) ;
- Lee, Hyung-Keun (Energy and Environmental Research Department, Korea Institute of Energy Research) ;
- Kim, Sun-Geon (Department of Chemical Engineering, Chung Ang University)
- 발행 : 1996.07.01
초록
반건식 배연탈황공정에서 사용되는 spray dryer absorber(SDA)에 대한 수치모사를 행하였다. 기본 방정식으로는 기체와 액적의 각 성분들의 물질수지식, 에너지수지식과 액적의 운동 방정식등이 포함되었다. 만들어진 모델은 대부분이 기존의 SPRAYMOD-M보다 실제의 pilot plant data를 더 잘 모사하였다. 실제 pilot plant에서 사용되는 값의 범위 내에서 선정된 공정변수가 SDA의 성능에 미치는 효과를 계산하고, 이를
A mathematical model has been developed for simulating the spray dryer absorber (SDA) used in semi-dry flue gas desulfurization process. Fundamental equations include the component mass and heat balances in both gas and droplet phases and the equation of motion for a single droplet. The model developed described the pilot-plant data much better than the existing SPRAYMOD-M model. The effect of the process variables, whose values were chosen within the operation limits of the actual pilot plants, on %
키워드