DOI QR코드

DOI QR Code

General evolutionary path for fundamental natural frequencies of structural vibration problems: towards optimum from below

  • Zhao, Chongbin (Finite Element Analysis Research Centre, Building J07, Engineering Faculty, University of Sydney) ;
  • Steven, G.P. (Finite Element Analysis Research Centre, Building J07, Engineering Faculty, University of Sydney) ;
  • Xie, Y.M. (Department of Civil and Building Engineering, Victoria University of Technology)
  • 발행 : 1996.09.25

초록

In this paper, both an approximate expression and an exact expression for the contribution factor of an element to the natural frequency of the finite element discretized system of a structure in general and a membrane in particular have been derived from the energy conservation principle and the finite element formulation of structural eigenvalue problems. The approximate expression for the contribution factor of an element is used to predict and determine the elements to be removed in an iteration since it depends only on the quantities associated with the old system in the iteration. The exact expression for the contribution factor of an element makes it possible to check whether the element is correctly removed at the end of an iteration because it depends on both the old system and the new system in the iteration. Thus, the combined use of the approximate expression and the exact expression allows a considerable number of elements to be removed in a single iteration so that the efficiency of the evolutionary structural optimization method can be greatly improved for solving the natural frequency optimization problem of a structure. A square membrane with different boundary supports has been chosen to investigate the general evolutionary path for the fundamental natural frequency of the structure. The related results indicated that if the objective of a structural optimization is to raise the fundamental natural frequency of the structure to an optimal value, the general evolutionary path during its optimization is that the elements are gradually removed along the direction from the area surrounded by the contour of the highest value to that surrounded by the contour of the lowest value.

키워드

참고문헌

  1. Barthelemy, J.F.M. and Haftka, R.T. (1993), "Approximation concepts for optimum structural design: a review", Structural Optimization, 5, 129-144. https://doi.org/10.1007/BF01743349
  2. Diaz, A.R. and Bendsoe, M.P. (1992), "Shape optimization of structures for multiple loading conditions using a homogenization method", Structural Optimization, 4, 17-22. https://doi.org/10.1007/BF01894077
  3. Gallagher, R.H. and Zienkiewicz, O.C. (1973), Optimum Structural Design, Wiley, New York.
  4. Grandhi, R.V. and Venkayya, V.B. (1988), "Structural optimization with frequency constraints", AIAA. J., 26, 858-866. https://doi.org/10.2514/3.9979
  5. Kohli, H.S. and Carey, G.F. (1993), "Shape optimization using adaptive shape refinements", Int. J. Num. Meth. Eng., 36, 2435-2451. https://doi.org/10.1002/nme.1620361408
  6. Masur, E.F. (1984), "Optimal structural design under multiple eigenvalue constraints", Int. J. Solids and Structures, 20, 211-231. https://doi.org/10.1016/0020-7683(84)90034-9
  7. Miura, H. and Schmit, L.A. (1978), "Second order approximation of natural frequency constraints in structural synthesis", Int. J. Num. Meth. Eng., 13, 337-351. https://doi.org/10.1002/nme.1620130209
  8. Seyranian, A. Lund, P.E. and Olhoff, N. (1994), "Multiple eigenvalues in structural optimization problems", Structural Optimization, 8, 207-227. https://doi.org/10.1007/BF01742705
  9. Venkayya, V.B. (1978), "Structural optimization: a review and some recommendation", Int. J. Num. Meth. Eng., 13, 203-228. https://doi.org/10.1002/nme.1620130202
  10. Xie, Y.M. and Steven, G.P. (1993), "A simple evolutionary procedure for structural optimization", Comput. Struct., 49, 885-896. https://doi.org/10.1016/0045-7949(93)90035-C
  11. Xie, Y.M. and Steven, G.P. (1994a), "Optimal design of multiple load case structures using an evolutionary procedure", Engineering Computations, 11, 295-302. https://doi.org/10.1108/02644409410799290
  12. Xie, Y.M. and Steven, G.P. (1994), "A simple approach to structural frequency optimization", Compute. Struct., 53, 1487-1491. https://doi.org/10.1016/0045-7949(94)90414-6

피인용 문헌

  1. A consistent point-searching algorithm for solution interpolation in unstructured meshes consisting of 4-node bilinear quadrilateral elements vol.45, pp.10, 1999, https://doi.org/10.1002/(SICI)1097-0207(19990810)45:10<1509::AID-NME643>3.0.CO;2-1
  2. Simultaneously evolutionary optimization of several natural frequencies of a two dimensional structure vol.7, pp.5, 1999, https://doi.org/10.12989/sem.1999.7.5.447
  3. Optimum shape design of rotating shaft by ESO method vol.21, pp.7, 2007, https://doi.org/10.1007/BF03027653
  4. A generalized evolutionary method for numerical topology optimization of structures under static loading conditions vol.15, pp.3-4, 1998, https://doi.org/10.1007/BF01203540
  5. Biomimetic control for redundant and high degree of freedom limb systems: neurobiological modularity vol.7, pp.3, 1996, https://doi.org/10.12989/sss.2011.7.3.169