DOI QR코드

DOI QR Code

Stability and failure of symmetrically laminated plates

  • Chai, Gin Boay (Division of Engineering Mechanics, School of Mechanical and Production Engineering, Nanyang Technological University) ;
  • Hoon, Kay Hiang (Division of Engineering Mechanics, School of Mechanical and Production Engineering, Nanyang Technological University) ;
  • Chin, Sin Sheng (Materials Research Division, Defence Science Organization, Ministry of Defence) ;
  • Soh, Ai Kah (GINTIC Institute of Manufacturing Technology)
  • 발행 : 1996.09.25

초록

This paper describes a numerical and experimental study on the stability and failure behaviour of rectangular symmetric laminated composite plates. The plates are simply supported along the unloaded edges and clamped along the loaded ends, and they are subjected to uniaxial in-plane compression. The finite element method was employed for the theoretical study. The study examines the effect of the plate's stacking sequence and aspect ratio on the stability and failure response of rectangular symmetric laminated carbon fibre reinforced plastics composite plates. The study also includes the effect of the unloaded edge support conditions on the postbuckling response and failure of the plates. Extensive experimental investigation were also carried out to supplement the finite element study. A comprehensive comparison between theory and experimental data are presented and discussed in this contribution.

키워드

참고문헌

  1. Ahmad, S., Irons, B.M. and Zienkiewicz, O.C. (1970), "Analysis of thick and thin shell structures by curved finite elements", International Journal for Numerical Methods in Engineering, 2(3), 419-451. https://doi.org/10.1002/nme.1620020310
  2. ANSYS (1989), Engineering Analysis System Theoretical Manual, Revision 4.4, edited by Peter C. Kohnke, Swanson Analysis System Inc., Pennsylvannia, U.S.A.
  3. Banks, W.M. and Harvey, J.M. (1978), "Experimental study of stability problems in composite materials", Stability Problems in Engineering Structures and Components, edted by T.H. Richards and P. Stanley, Applied Science Publishers Ltd, London. 1-22.
  4. Bathe, K.J. (1982), Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood Cliffs.
  5. Buskell, N., Davies, G.A.O. and Stevens, K.A. (1985), "Postbuckling failure of composite plates", Proceedings of the Third International Conference on Composite Structures, 290-314.
  6. Chai, G.B., Banks, W.M. and Rhodes, J. (1989), "Experimental study on the buckling and postbuckling of carbon fibre composite plates with and without interply disbonds", Proceedings of IMechE Conference on Design in Composite Materials, Machanical Engineering Publications Ltd, London, 69-85.
  7. Chai, G.B., Banks, W.M. and Rhodes, J. (1991), "An experimental study on laminated plates in compression", Composite Structures, 19, 67-87. https://doi.org/10.1016/0263-8223(91)90075-A
  8. Chai, G.B. and Hoon, K.H. (1994), "Numerical and experimental study of large deflection of symmetrically laminated composite plates in compression", Structural Engineering and Mechanics, 2(4), 359-367. https://doi.org/10.12989/sem.1994.2.4.359
  9. Chai, G.B. (1991), "Large deflections of laminated composite plates", Composites Science and Technology, 42(4), 349-360. https://doi.org/10.1016/0266-3538(91)90062-T
  10. Coan, J.M. (1959), "Large deflection theory for plates with small initial curvature loaded in edge compression", Jnl. Appl. Mech., 27, 143.
  11. Davies, G.A.O., Buskell, N. and Stevens, K.A. (1986), "Edge effects in failure of compression plates", Proceedings of the European Mechanics Colloqium 214, Mechanical Behaviour of Composites and Laminates, edited by W.A. Green and M. Micunovic, Elsevier Applied Science, Essex, England, 1-11.
  12. Kapania, R.K. and Raciti, S. (1989), "Recent advances in analysis of laminated beams and plates, Part 1: Shear effects and buckling", AlAA Journal, 27(7), 923-934.
  13. Leissa, A.W. (1987), "An overview of composite plate buckling", Proceedings of the Fourth International Conference on Composite Structures, 1, 1-29.
  14. Leissa, A.W. (1981), "Advances in vibration, buckling and postbuckling studies on composite plates", Composites Structures, London, Applied Science Publishers Ltd, 312-322.
  15. Natsiavas, S., Babcock, C.D. and Knauss, W.G. (1990), "Postbuckling delamination of a stiffened composite plate using finite elements", Composite Material Technology, 1990, edited by D. Hui and T.J. Kozik, ASME, New York, 101-106.
  16. Ridgard, C. (1983), "The effects of postbuckling behaviour upon the performance of stability-limited composite structures", B. Ae-MSM-R-GEN-0509.
  17. Starnes, J.H. and Rouse, M. (1981), "Postbuckling and failure characteristics of flat rectangular graphite epoxy plates loaded in compression", Proceedings of AlAA/ASME/ASCE/AHS 22nd Structures, Structural Dynamics and Materials Conference, Atlanta, Georgia.
  18. Tsai, S.W. and Wu, E.M. (1971), "A general theory of strength for anisotropic materials", Journal of Composite Materials, 5, 58-80. https://doi.org/10.1177/002199837100500106
  19. Yamaki, N. (1959), "Postbuckling behaviour of rectangular plates with small initial curvature loaded in edge compression", Jnl. Appl. Mech., 26, 407-414.
  20. Yusuff, S. (1952), "Large deflection theory for orthotropic rectangular plates subjected to edge compression", Jnl. Appl. Mech., 19, 446-450.

피인용 문헌

  1. Stress analysis of a postbuckled laminated composite plate vol.7, pp.4, 1999, https://doi.org/10.12989/sem.1999.7.4.377
  2. Elastic/plastic buckling of a composite flat plate subjected to uniform edge compression vol.38, pp.3, 2000, https://doi.org/10.1016/S0263-8231(00)00038-0