Structural Engineering and Mechanics

  • 제4권4호
  • /
  • Pages.451-460
  • /
  • 1996
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Buckling of cylindrical shells under external pressure proposition of a new shape of self-stiffened shell

  • Araar, M. (Institute of Civil Engineering, University of Annaba) ;
  • Jullien, J.F. (Concrete and Structures Laboratory)
  • 발행 : 1996.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

We propose a new shape of cylindrical shell formed by multiples vaults which gives a self-stiffening against buckling. By an experimental and numerical study of cylindrical shells with a repeated defect, on the circumferential direction made only of outside oriented wave-defects, we show that multiple vault cylindrical shells can have a good behaviour in buckling. An optimal behaviour is obtained by optimization of the vaults number, with conduces to a special multiple vault cylindrical shell named "ASTER shell".

키워드

참고문헌

  1. Araar, M. (1990), "Contribution to the self-stiffening of cylindrical shells against buckling", Doctorat Thesis, National Institute of Applied Sciences (INSA) of LYON (FRANCE), 320.
  2. Araar, M., Debanneh, N. (1992), "Prise en compte des imperfections dans le dimensionnement des coques cylindriques sous pression externe", Annales Maghrebines de lIngenieur, numero special, Actes du 3eme Colloque Maghrebin sur les modeles numeriques de lIngenieur, Tunis, 26-29 Nov. 576-581.
  3. Debbaneh, N. (1988), "Flambage des coques de revolution a meridienne brisee sous pression laterale-influence des conditions aux limites", Thees de Doctorat. INSA de LYON, 268.
  4. Donnell, L.H. (1956), "Effect of imperfections on buckling of thin cylinders under external pressure", Journal of Applied Mechanics, December, 569-575.
  5. Galletly, G.D. and Bart, R. (1956), "Effects of boundary conditions and initial out-of-roundness on the strength of thin-walled cylinders subject to external hydrostatic pressure", Journal of Applied Mechanics, 23, 351-358.
  6. Jullien, J.F. and Araar, M. (1990), "Coque a haute resistance a geometrie de revolution, Brevet $n^{\circ}$ 90.04277, INSA de LYON (France).
  7. Montague, P. (1969), "Experimental behavior of thin-walled cylindrical shells subjected to external pressure", Journal of Mech. Eng. Sciences, 40-50.
  8. Waeckel, N. and Jullien, J.F. (1984), "Experimental studies of the instability of cylindrical shells with initial geometric imperfections", San Antonio (Texas), June 17-21, ASME: Special publications PVP, 89, 69-77.
  9. Yamaki, N. (1984), Elastic stability of circular cylindrical shells, Amsterdam: North-Holland, 558.
  10. Yamaki, N. (1970), "Influence of prebuckling deformations on the buckling of circular cylindrical shells under external pressure", Rep. Inst. Hight Speed Mech., 21, 81-104.

피인용 문헌

  1. Buckling of the multi-vaulted "Aster" shell under axial compression alone or combined with an external pressure vol.6, pp.7, 1998, https://doi.org/10.12989/sem.1998.6.7.827
  2. Two types of optimization of a cylindrical shell subjected to lateral pressure vol.83, pp.7, 2006, https://doi.org/10.1016/j.ijpvp.2006.04.001
  3. Numerical studies of the failure modes of ring-stiffened cylinders under hydrostatic pressure vol.70, pp.4, 1996, https://doi.org/10.12989/sem.2019.70.4.431