DOI QR코드

DOI QR Code

Application of the first-order perturbation method to optimal structural design

  • Lee, Byung Woo (Dongeui Technical Junior College) ;
  • Lim, O Kaung (Research Institute of Mechanical Technology, Pusan National University)
  • 발행 : 1996.07.25

초록

An application of the perturbation method to optimum structural design with random parameters is presented. It is formulated on the basis of the first-order stochastic finite element perturbation method. It also takes into full account the stress, displacement and eigenvalue constraints, together with the rates of change of the random variables. A method for calculating the sensitivity coefficients in regard to the governing equation and the first-order perturbed equation has been derived, by using a direct differentiation approach. A gradient-based nonlinear programming technique is used to solve the problem. The numerical results are specifically noted, where the stiffness parameter and external load are treated as random variables.

키워드

참고문헌

  1. Benaroya, H. and Rehak, M. (1988), "Finite element methods in probabilistic structural analysis : a selective review", Appl. Mech. Rev., 41(5), 201-213. https://doi.org/10.1115/1.3151892
  2. Banichuk, N. K. (1984), "Application of perturbation method to optimal design of structures, in new directions in optimum structural design", Edited by E. Atrek, R, H, Gallagher, K. M. Ragsdell and O. C. Zienkiewicz, 231-248, john Wiley, NY.
  3. Collins, J. D. and Thomson, W. T. (1969), "The eigenvalue problem for structural systems with statistical properties", AIAA Journal, 7(4), 642-648. https://doi.org/10.2514/3.5180
  4. Contreras, H. (1980), "The stochastic finite element method", Computers & Structures, 12, 341-348. https://doi.org/10.1016/0045-7949(80)90031-0
  5. Haftka, R. T., Gurdal, Z. and Kamat, M. P. (1990), Elements of Structural Optimization, Kluwer Academic Publishers.
  6. Haug, E. J. and Arora, J. S. (1979), Applied Optimal Design, John Wiley & Sons.
  7. Haug, E. J., Choi, K. K. and Komkov, V. (1984), Design Sensitivity Analysis of Structural Systems, Academic Press.
  8. Hisada, T. and Nakagiri, S. (1981), "Stochastic finite element method developed for structural safety and reliability", Proceedings of 81 3rd Int. Conf. on Structural Safety and Reliability, 409.
  9. Lim, O. K. and Arora, J. S. (1986), "An active set RQP algorithm for engineering design optimization", Computer Methods in Appl. Mech. and Eng., 57, 51-65. https://doi.org/10.1016/0045-7825(86)90070-8
  10. Liu, W. K., Belytschko, T. and Mani, A. (1986), "Random field finite elements", Int. J. for Num. Meth. in Eng., 23, 1831-1845. https://doi.org/10.1002/nme.1620231004
  11. Wu, C. H. (1968), "The strongest circular arch-a perturbation solution", J. Appl. Mech., 35(3), 476-480. https://doi.org/10.1115/1.3601238

피인용 문헌

  1. Application of Stochastic Finite Element Methods to Study the Sensitivity of ECG Forward Modeling to Organ Conductivity vol.55, pp.1, 2008, https://doi.org/10.1109/TBME.2007.900563