Structural Engineering and Mechanics

  • 제4권3호
  • /
  • Pages.257-276
  • /
  • 1996
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical simulation of concrete slab-on-steel girder bridges with frictional contact

  • Lin, Jian Jun (Forintek Canada Corporation, National Wood Products Research Institute) ;
  • Fafard, Mario (Department of Civil Engineering, Laval University) ;
  • Beaulieu, Denis (Department of Civil Engineering, Laval University)
  • 발행 : 1996.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

In North America, a large number of concrete old slab-on-steel girder bridges, classified noncomposite, were built without any mechanic connections. The stablizing effect due to slab/girder interface contact and friction on the steel girders was totally neglected in practice. Experimental results indicate that this effect can lead to a significant underestimation of the load-carrying capacity of these bridges. In this paper, the two major components-concrete slab and steel girders, are treat as two deformable bodies in contact. A finite element procedure with considering the effect of friction and contact for the analysis of concrete slab-on-steel girder bridges is presented. The interface friction phenomenon and finite element formulation are described using an updated configuration under large deformations to account for the influence of any possible kinematic motions on the interface boundary conditions. The constitutive model for frictional contact are considered as slip work-dependent to account for the irreversible nature of friction forces and degradation of interface shear resistance. The proposed procedure is further validated by experimental bridge models.

키워드

참고문헌

  1. ACI Committee 363 (1984), "State of the art report on high strength concrete", Amer. Conc. Inst. J., 81 (4), 361-411.
  2. Burdekin, M., Cowley, A. and Back, N. (1978), "An elastic mechanism for the microsliding characteristics between contacing machined surfaces", J. Mech. Engrg. Sci., 20 (3), 341-350.
  3. Collins, M.P. and Mitchell, D. (1987), Prestressed Concrete Basics, Can. Prestressed Conc. Inst., Ottawa, Canada.
  4. Curnier, A. (1984), "A theory of friction", Int. J. Solids Struct., 20 (7), 637-647. https://doi.org/10.1016/0020-7683(84)90021-0
  5. Dionne, G., Picard, A., Beaulieu, D. et Fafard, M. (1991), "Comportement experimental des ponts acierbeton avec dalle de beton non-participante", Rapport, Dep. de Genie Civil, Universite Laval, 293.
  6. Dhatt, G., Marcotte, L. and Matte, Y. (1986), "A new triangular discrete Kirchhoff plate shell element", Int. J. Num. Meth. Engrg., 23, 453-470. https://doi.org/10.1002/nme.1620230310
  7. Fafard, M., Lin, J. Massicotte, B. and Beaulieu, D. (1993), "Application of FEM of the analysis and strengthening of bridges made of concrete slabs and steel beams", European Jour. of Finite Elements, 2 (3), 319-355.
  8. Fredriksson, B. (1976), "Finite element solution of surface nonlinearities in structural mechanics with special emphasis on contact and fracture mechanics problems", Comput. Struct., 6, 281-290. https://doi.org/10.1016/0045-7949(76)90003-1
  9. Klarbring, A. (1985), "The influence of slip hardening and interface compliance on contact stress distributions-A mathematical programming approach", Studies in Appl. Mech.-Mech. of Mat. Interfaces, Series 11, Ed. A.P.S Selvaburai and G.Z. Boyiadjis, 43-59.
  10. Labonte, J., Beaulieu, D. et Picard, A. (1991), "Etude experimentale du coefficient de friction entre beton et acier", Rapport GCT-91-02, Dep. de Genie Civil, Universite Laval, 116.
  11. Lin, J.J., Fafard, M., Beaulieu, D. and Massicotte, B. (1991), "Nonlinear analysis of composite bridges by the finite element method", Comput. Struct., 40 (5), 1151-1167. https://doi.org/10.1016/0045-7949(91)90386-Z
  12. Massicotte, B., Elwi, A.E. and MacGregor, J.G. (1990), "Tension-stiffening model for planar reinforced concrete members", J. Struct. Engrg., ASCE, 116 (9), 3039-3058. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(3039)
  13. Michalowski, R. and Mroz, X. (1978), "Associated and non-associated sliding rules in contact friction problems", Arch. Mech., 30 (3), 259-276.
  14. Okamoto, N. and Nakazawa, M. (1979), "Finite element incremental contact analysis with various frictional conditions", Int. J. Num. Meth. Engrg. 14, 337-357. https://doi.org/10.1002/nme.1620140304
  15. Plesha, M. and Belytschko, T. (1985), "On the modeling of contact problems with dilation", Studies in Appl. Mech.-Mech. of Mat. Interfaces, Series 11, Ed. A.P.S Selvadurai and G.Z. Boyiadjis, 63-77.
  16. Rabbat, B. G. and Russell, H. G. (1988), "Friction coefficient of steel on concrete", J. Struct. Engrg. 111 (3), ASCE, 505-515.
  17. Sachdeva, T.D. and Ramakrishnan, C. V. (1981), "A finite element solution for the two-dimensional elastic contact problems with friction", Int. J. Num. Meth. Engrg., 17, 1257-1271. https://doi.org/10.1002/nme.1620170809
  18. Torstenfelt, Bo R. (1983), "Contact problems with friction in general purpose finite element computer programs, Comput. Struct., 16 (1-4), 487-493. https://doi.org/10.1016/0045-7949(83)90188-8
  19. Yamaguchi, E. and Chen, W.F. (1990), "Cracking model for finite element analysis of concrete materials", J. Mech. Engrg. ASCE, 116 (6), 1242-1260. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:6(1242)
  20. Zienkiewicz, O.C. (1977), The Finite element method, McGraw-Hill, 3rd ed., New York.

피인용 문헌

  1. Steel–Concrete Composite Plate Girders Subject to Shear Loading vol.129, pp.9, 2003, https://doi.org/10.1061/(ASCE)0733-9445(2003)129:9(1230)