A Study on Behavior of Heavy Metals during Waste Incineration

폐기물 소각시 중금속 성분의 거동에 관한 연구

  • 박용이 (제주대학교 해양환경공학과) ;
  • 허철구 (제주대학교 해양환경공학과)
  • Published : 1996.12.01

Abstract

The incineration tests of mixed industrial wastes using the stoker type incinerator are carried out to investigate the partitioning characteristics of heavy metals during incineration. The results obtained from this study are as follow. The partitioning characteristics of heavy metals throughout this incinerator are found that, at given condition of $700^{\circ}C$, the elements with the relatively high boiling point such as Cr, Cu and Pb are partitioned into a bottom ash, a fry ash captured tv cyclone, and a flue gas stream, 67~88%, 2~19% and 6~16% of initial amount entering the incinerator, respectively, but the Cd and Hg of 75~81% is vaporized into the flue gas. It appears that the partitioning characteristics according to the particle size of ash is different between the bottom ash and the fly ash. For bottom ash, the fraction of partitioning into 75${\mu}{\textrm}{m}$ oversized particles is reatively high. For fly ash, the characteristics of distributions with the particle size can not be clearly shown.

Keywords

References

  1. 2차년도최종보고서, 동력자원부 하폐수 슬러지의 열분해 공정 연구 동력자원부
  2. Water and Environmental Technology Standard Methods of Preparing Refuse-Dericed Fuel(RDF-3) Samples for Analyses of Metals E926-83, Annual book of SATM Standard ASTM
  3. ISWA Specialized Seminar Incinerator Emissions of Heavy Metal and Particulate no.18;19 The Flux fo Metals through Municipal Solid Waste Incinerators Brunner,P.H.;H.Monch
  4. Journal Environ. Sci. Health v.28A no.2 Prace Metal Analysis of Size-Fractioned Municipal Solid Waste Incinerator Fly Ash and its Leachate Buchhloz,B.A.
  5. Combustion and Flame v.93 no.1;2 An Equilibrium Analysis to Determine the Speciation of Metals in an Incinerator Chang,Y.W.;P.Biswas
  6. Air Pollution Control: A Design Approach Cooper,C.D.;F.G.Alley
  7. Environ. Sci. Technol. v.8 no.13 Trace Elements in Fly Ash: Dependence of Concentration on Particle Size Davison,R.L.;D.F.S.Nausch;J.R.Wallace;C.A.Ecans,Jr.
  8. Atmospheric Environ. v.24A no.2 Mass and Trace Element Size Distributions of Aerosols Emitted by a hospital Refuse Incinerator Esko,I.K.;T.A.Pakkanen
  9. Environ. Sci. Technol. v.26 no.5 Behavior fo Heavy Metals in the Combustion Gases of Urban Waste Incinerators Fernandez,M.A.;L.Martlnez;M.Segarra;J.C.Garcla;F.Espleell
  10. Environ. Sci. Technol. v.15 no.1 Atmospheric Emissions of Elements on paricles from the Parkway Sewage Sludge Incinerator Greenberg,R.R.;G.E.Gordon;W.H.Zoller
  11. AIChE Sym. Series no.276 Metal Capture during Fluidized Bed Incineration of Solid Waste Ho,T.C.;J.M.Chen;J.R.Hopper
  12. JAPCA v.38 no.7 A Model Analysis of Metal Partitioning in a Hazardous Waste Incineration System Lee,C.C.
  13. Combustion Characteristics of Sewage Sludge and Reduction of Pollutants in Fluidized Bed Incinerators Lee,K.H.
  14. Proc., of the 10th Int. Conf. on FBC no.2 Trace Metal Rentention in a Fluidized Bed Combustor Litt,R.D.;T.L.Tewksbury
  15. JWPCF v.52 no.10 Fate and Behavior of Selected Heavey Metals in Incinerated Sludge Richard,T.D.;R.M.Manganelli;G.T.Baer,Jr.
  16. Journal of Korea Solid Wastes Eng. Soc. v.9 no.2 Thermal Behavior of Hazardous and Radioactive Metals and Their Effects on Air Pollution(Ⅰ) Seo,Y.C.;H.C.Yang;K.H.Kang;H.H.Park
  17. Environ. Sci. Technol. v.13 no.4 Sources of Metals in Municipal Incinerator Emissions Stephen,L.L.;G.E.Gordon
  18. Journal Pollut. Contr. v.22 no.3 Saving Energy in Fluidized Bed Incineration for Sludge Takeuchi,T.
  19. 産業公害 v.28 no.1 發棄物の燒却に伴う有害物質の挑出とその對策 田中勝
  20. 月刊發棄物 v.18 no.2 こみ燒却灰の對策 佐久間英三