DEVELOPMENT OF THE THERMAL MODEL FOR KITSAT-1/2 MICROSATELLITES AND ITS VERIFICATION USING IN-ORBIT TELEMETRIES

우리별 1, 2호의 열제어 모델 개발 및 궤도 운용 결과를 바탕으로 한 모델의 검증

  • 박성동 (한국과학기술원 인공위성센터) ;
  • 배정석 (한국과학기술원 인공위성센터) ;
  • 성단근 (한국과학기술원 인공위성센터) ;
  • 최순달 (한국과학기술원 인공위성센터)
  • Published : 1996.06.01

Abstract

This study is based upon the thermal modeling, analysis and operational results of KITSAT-1 and KITSAT-2 microsatellites launched on August 11, 1992 and Septermber 26, 1993, respectively. As KITSAT-1/2 was designed to be launched as an auxiliary payload of ARIANE launcher, the constraints on volume, power consumption, and mass were required to adopt passive thermal control method controlling absorptivity, emissivity, and conductivities among adjacent modules. The main of KITSAT was to take Earth images using CCD cameras positioned at the bottom of spacecraft, in which the cameras were always pointing to the center of Earth. This study is concerned with orbital analysis, thermal modeling, simulation results, and its verification by utilizing in-orbit telemetry data of KITSAT-2. The results of telemetry analysis show that the thermal modeling is matched to actual temperature data within 10 degrees of error range in average.

이 연구는 1992년 8월 11일과 1993년 9월 26일 발사된 우리별 1호 및 우리별 2호의 열제어 모델 및 그 동안의 운용 결과에 대한 해석을 바탕으로 한 것이다. 우리별 1, 2호는 아리안 발사체의 초소형 위성 탑재를 위한 특수 구조물에 장착되어 발사되었기 때문에 크기, 전력, 무게 등의 제한으로 인해 외부로부터의 열 흡수와 방출의 제어 및 내부의 연결 모듈간의 열 흐름을 제어하여 위성체 전반의 열적 환경을 조절하는 수동적인 방식의 열제어를 채택하게 되었다. 우리별 위성의 주 임무는 위성 기술의 개발과 더불어 위성체 바닥면에 탑재된 CCD 카메라를 이용하여 지구 표면을 촬영하는 것이었기 때문에 위성의 바닥면은 항상 지구의 중심을 향하고 있게 된다. 이 연구는 위성의 임무 궤도에 대한 분석으로부터 열 모델링, 시뮬레이션 결과 및 우리별 2호의 실제 운용헤서 얻어진 원격검침 정보를 바탕으로 한 열 모델의 평가를 포함한다. 이 분석 결과를 바탕으로 수동 제어에 의한 우리별 위성의 열 모델 및 해석이 실제 측정된 온도 데이터와 평균 오차 $$10^{\circ}C$ 이내에서 일치되었음을 보여 준다.

Keywords