Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지

The Elasto-Plastic Finite Element Analysis of Ductile Fracture in Shape Rolling

형상압연시 연성파괴의 탄소성 유한요소해석

  • 원영목 (서울대학교 금속공학과 및 신소재 공동연구소) ;
  • 오규환 (서울대학교 금속공학과 및 신소재 공동연구소)
  • Published : 1996.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

During the shape rolling process the influence of reduction ration and taper of shape roller on deformation and limit of ductile fracture such as free surface cracks developing in the workpiece has been studied. The deformation behaviours were analyzed by the 3-dimensional elasto-pastic finite element method and the conditions of ductile fracture were determined from 3-dimensional elasto-plastic finite element method and modified Cockrogt-Latham criterion. The deformed geometry and prediction of ductile fracture by 3-dimensional elasto-plastic finite element method are compared with experimental results The calcuated results are in good agreements with experimental data. The analysis used in the study was found to be effective in predicting the shape rolling process.

Keywords

References

  1. J. for Numerical Methods in Eng. v.30 Finite element simulation of three-dimension deformation in shape rolling K. Mori;K. Osakada
  2. Trans. ASME, J. Eng. Ind. v.112 Application of three-dimensional finite element analysis to shape rolling process J. J. Park;S. I. Oh
  3. 대한기계학회 추계학술대회 논문집 단순화된 3차원 유한요소법을 이용한 정상상태 성형과정 연구 신현우;김동원;김낙수
  4. Trans. ASME, J. Eng. Ind. v.114 Simulation of square-to-oval single pass rolling using a computationally effective finite and slab element method N. Kim;S. M. Lee;W. Shin;R. Shivpuri
  5. Steel Research v.60 no.9 The predictive capabilities of a thermal model of flat rolling J. G. Lenard;M. Pietrzyk
  6. J. of Materials processing Technology v.27 Roll pass evaluation for hot shape rolling processes P. Xin;T. Aizawa;J. Kihara
  7. 소성가공 v.2 no.3(4) 열간압연의 유한요소해석 김낙수
  8. J. Apple. Mech. v.35 A criterion for ductile fracture by the growth of hole F. A. McClintock
  9. National Engineering Laboratory, Report No. 240 A simple criterion of fracture for ductile of metals M. G. Cockroft;D. J. Latham
  10. J. Inst. Metals v.96 Ductility and the workability of metals M. G. Cockroft;D. J. Latham
  11. Trans. ASME, J. Eng. Ind. v.101 no.1 Ductile fracture in axisymmetric extrusion and drawing S. I. Oh;C. C. Chen;S. Kobayashi
  12. 소성가공 v.3 no.2 금속 성형공정에서 연성파괴예측 고대철;이진희;김병민;최재찬
  13. Finite Element Procedures in Engineering analysis K. J. Bathe
  14. Studies in Large Plastic Flow and Fracture P. W. Bridgman
  15. Ductile Fracture of Metals P. F. Thomason