Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Experimental Study on the chuncking Pressure Distribution of Electro-Magnetic Chucks

전자척의 고정압력분포에 관한 실험적 연구

  • 김청균 (홍익대학교 기계공학과)
  • Published : 1996.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with the distributions of magnetic flux of an electro-magnetic chuck which is one of the most commonly used chucking attachments in a surface grinding machine. The measured results showed good correspondence with the theoretical results which were previously presented by the same author. The normal and tangential components of the magnetic flux density were measured using the gauss meter. The measured results indicated that the magnetic flux density was periodically changing over the transverse position to the magnetic pole. The normal component of magnetic flux decreases very rapidly for the increased z position.

Keywords

References

  1. Bulletin of JSME v.29 no.250 Analysis of Chucking Pressure Distribution in Consideration of Joints Kadowaki, Y.
  2. Trans. of JSME v.48 no.429C The Directional Orientation of Stiffness of the Chucked Workpiece Doi, M.;Masuko, M.;Ito, Y.
  3. Trans. of JSME v.48 no.431C Static Characteristics of 7/24 Taper Joint for Machining Centers Tsutsumi, M.;Anno, Y.;Ebata, N.
  4. Bulletin of JSME v.28 no.237 Study on the Chucking Force of an Electro-Magnetic Chuck Saito, Y.;Nishiwaki, N.;Ootani, T.;Okimoto, K.
  5. J. of KSPE v.9 no.2 Analysis of Magnetic Flux Density in Electro-Magnetic Chucks Kim, C. K.
  6. J. of JSPE v.44 no.11 The Effect of Methods for Chucking Workpieces and Tools on Machining Accuracy Nakano, Y.
  7. Bulletin of JSME v.28 no.245 A Study on Parametric Vibration in Chuck Work Doi, M.;Masuko, M.;Ito, Y.;Tezuka, A.