고장에 대한 내성을 갖는 로봇 매니퓰레이터 시스템의 개발에 관한 최근연구동향

  • Published : 1996.05.01

Abstract

본 고에서는 고장에 대한 내성을 갖는 로봇 시스템에 관련된 전반적인 연구분야에 대한 소개를 하였으며 구조적인 측면에 중점을 두어 기술되었으나, 고장에 내성을 갖는 위치/속도 센서, 힘/토크 센서 그리고 로봇 제어에 관련된 하드웨어와 소프트웨어 등과 같은 로봇 구성 요소들의 개발에 관한 연구, 고장이 발생하였을 경우에 수행중인 작업을 지속적으로 그리고 성공적으로 수행할 수 있도록 하는 고장회복을 위한 제어기법 등에 관한 구체적인 방법 등에 대하여 매우 활발한 연구가 필요된다. 마지막으로, 이러한 고장에 대한 내성을 갖는 로봇 매니퓰레이터의 개발에 관한 중요성이 인식되어 국내에서도 높은 관심과 더불어 활발한 연구가 진행되었으면 한다.

Keywords

References

  1. Proc. of the First Int. Symp. on Measurement and Control in Robotics Four-Level Fault Tolerance in Manipulator Design for Space Operation Tesar,D.;Sreevijayan,D.;Price,C.R.
  2. Proc. of IEEE Robotics and Automation Conf. A Fault-Tolerant Joint Drive System for Space Shuttle Remote Manipulator System Wu,E.;Difler,J.;Hwang,J.;Chladek,J.K.
  3. M.S. Thesis, Dept. of Mechanical Engineering, The University of Texas at Austin On the Design of Fault-Tolerant Robotic Manipulator System Sreevijayan,D.
  4. Ph.D. Dissertation, Dept. of Mechanical Eng. University of Texas at Austin Fault-Tolerant Control Algorithms for Serial and Parallel Manipulators Ting,Y.
  5. Proc. of IEEE Robotics and Automation Conf. A Control Structure for Fault-Tolerant Operation of Robotic Manipulators Ting,Y.;Tosunoglu,S.;Tesar,D.
  6. Proc. of IEEE Decision and Control Conf. Actuator Saturation Avoidance for Fault-Tolerant Robots Ting,Tosunoglu,S.;Freeman,R.A.
  7. Proc. of IECON '93 Fault Tolerance for Modular Robots Tosunoglu,S.
  8. ACM Computing Surveys v.9 no.3 Petri Nets Pearson,J.L.
  9. Advances in Robotics and Automation v.2 Petri Nets in Automation and Manufacturing Desrochers,A.A.;Al-Jaar,R.Y.
  10. Proc. on the NATO Advanced Study Institute on Generic Techniques of System Reliability Assessment Fault Tree Analysis-Concepts and Techniques Fussell,J.B.
  11. PERFORMANCE '84, Models of Computer System Performance Extended Stochastic Petri Nets:Application and Analysis Dugan,J.B.(et al.)
  12. IEEE Trans. on Circuits and System v.CAS-34 no.6 Hierachical Models for Systems Reliability, Maintainability, and Availability Ammar,H.H.;Huang,Y.F.;Liu,R.W.
  13. ACM Compyting Surveys v.20 no.4 Survey of Software Tools for Evaluating Reliability, Availability, and Serviceability Johnson,A.M.;Malek,M.
  14. Journal of Cuidance, Control and Dynamics v.9 no.1 Extension of the Mid-value Selection Technique for Redundancy Management of Inertial Sensors Potter,J.E.;Suman,M.C.
  15. Design and Analysis of Fault-Tolerant Digital Systems Johnson,B.W.
  16. Sound Out the Merits of Machine Monitoring Kellock,B.
  17. Sound and Vibration Condition Monitoring of Machinery Using Motor Current Signature Analysis Kryter,R.C.;Haynes,H.D.
  18. Robotics and Expert Systems Robot Fault Diagnosis Using Deep and Shallow Modeling Approaches Krishnamurthi,M.Mayer,R.J.;Friel,P.G.
  19. Robotics and Mnufacturing Recent Trends in Research, Education, and Applications An Expert System for the Diagnosis of Faults of Indujstrial Robots Hormann,K.;Hubner,T.;Rembold,V.
  20. Proc. of the 1991 IEEE Int. Conf. on Robotics and Automation Real-Time Fault Diagnosis with Multiple Aspect Models Padalkar,S.(et al)
  21. Proc. of the First Int. Conf. Intelligence and Expert Systems v.Ⅰ A Diagnostic Expert System for Analyzing Multiple Failure Transients in Nuclear Power Plants Martin,R.P.;Nasserscharif,B.
  22. Proc. of the First Int. Conf. on Industrial and Eng. Applications of Artifical Intelligence and Expert System v.Ⅰ Pattern-Based Fault Diagnosis Using Neural Netsworks Dietz,W.E.Kiech,E.L.;Ali,M.
  23. Master's Thesis, Dept. of Electrical Eng. University of Texas at Austin Fault Detection Using Neural Networks Kaliyur,K.M.
  24. Master's Thesis, Massachusetts Institute of Technoloty Parity Vector Compensation for FDI Hall,S.R.
  25. Automatica v.22 no.3 Optimally Robust Redundancy Relations for Failure Detection in Uncertain Systems Lou,X.C.;Willsky,A.S.;Verghese,G.C.
  26. Journal of Guidance, Control, and Dynamic v.11 no.6 Failure Detection In Dynamic Systems with Modeling Errors Horak,D.T.
  27. Int. Journal of Systems Science v.13 no.2 Instrument Fault Detection in Systems with Uncertainties Watanabe,K.;Himmelblau,D.M.
  28. Automatica v.26 no.3 Fault Diagnosis in Dynamic Systems Using Analytical and Knowledge-Based Redundancy-A Survey and Some New Results Frank,P.M.
  29. Automatica v.26 no.3 Fault Diagnosis in Dynamic Systems Using Analytical and Knowledge-Based Redundancy-A Survey and Some New Results Frank,P.M.
  30. Signal Detection Theory Hancock,J.C.;Wintz,P.A.
  31. Sequential Methods in Statics Wetherill,G.B.
  32. Journal of Gaudance and Control v.2 no.1 Generalized Likelihood Ratio Test for FDI in Redundant Sensor Configurations Daly,K.C.;Gai,E.;Harrison,J.V.
  33. Master's Thesis, Massachusetts Institute of Technology Parity Vector Compensation for FDI Hall,S.R.
  34. Automatica v.12 A Survey of Design Methods for Failure Detection in Dynamic Systems Willsky,A.S.
  35. Probability and Statistics for Engineering Miller,I.;Freund,J.E.
  36. IEEE Trans. on Automatic Control v.AC-29 Analytical Redundancy and the Design of Robust Failure Detection Systems Chow,E.Y.;Willsky,A.S.
  37. IEEE Computer Systems Magazine Survey of Model-Based Failure Detection and Isolation in Complex Plants Gerler,J.J.
  38. IEEE Trans. on Automatic Control A Sequential Failure Detection Technique and its Aplications Chien,T.T.;Adams,M.B.
  39. Annals of mathematics Studies no.34 Automata Studies Von Neumann,J.;C.E.Shannon(ed.);E.F.Moore(ed.)
  40. Int. Journal of Robotics Research v.6 no.2 Dexterity for Design and Control of Kinematically Redundant Manipulator Klein,C.A.;Blaho,B.E.
  41. Trans. on Journal of Robotics and Automation v.8 no.5 Multiple-Goal Kinematic Mechanism Optimization of a Parallel Spherical Mechanism with Aotutor Redundancy Kurtz,R.;Hayword,V.W.
  42. KSME Journal v.8 no.4 Optimal Design of a Redundantly Actuated 4-Legged Six Degree of Freedom Parallel Manipulator Using Composite Design Index Yi,Byung-Ju;Kim,Whee-Kuk
  43. 94대한기계학회 춘계학술대회 논문집 고장에 견디는 매니퓰레이터의 설계 이병주;김희국
  44. 대한기계학회논문집 v.18 no.11 고장에 강인한 구형 3 자유도 모듈의 기구학적 해석 이병주;김희국
  45. 대학기계학회 논문집 v.19 no.11 여유 구동/자유도 매니퓰레이터의 고장에 견디는 성증에 대한 해석 이병주;김희국;김동구
  46. 한국정밀공학회 v.13 no.4 고장에 견디는 공간형 여유자유도 매니퓰레이터의 최적설계에 관한 연구 김희국;김동구;이병주
  47. Oak Ridge National Laboratory Reivew v.1 Robotics for Nuclear Reactors and Hazardous Environments Sweeney,F.
  48. IEEE Trans. on Aerospace and Electronic Systems v.24 no.1 Crippled Motion in Robots Pradeel,A.K.(et al.)
  49. Proc. of IEEE Robotics and Automation Conf. Fault Tolerance of Kinematically Redundant Manipulators Maciejewsky,A.
  50. Computer Elect. Engng v.20 no.3 Dexterity Optimization of Kinematically Redundant Manipulators in the Presence of Joint Failures Lewis,C.;Maciejewsky,A.
  51. Proc. on IEEE Robotics and Automation Conf. An Example of Failure Tolerant Operation of a Kinematically Redundant Manipulator Maciejewsky,A.
  52. Proc. of the 1992 IEEE Int. Conf. on Robotics and Automation Joint Torque Optimization of Redundant Manipulators via the Null Space Damping Method Kang,H.J.;Freeman,R.A.
  53. Computer Elect. Eng. v.20 no.3 Kinematic Design of Fault Tolerant Manipulators Paredis,C.J.J.;Au,W.K.F.;Khosla,P.
  54. Proc. of IEEE Robotics and Automation Conf. Mapping Tasks into Fault Tolerant Manipulators Paredis,C.J.J.;Khosla,P.
  55. Linear Algebra and Its Applications(1st ed.) Strang,G.
  56. Applied Nemerical Analysis Gerald,C.F.
  57. Proc. of the 1991 IEEE Int. Conf. on Robotics and Automation An Approach to Model Based Fault Diagnosis of Industrial Robots Freyermuth,B.
  58. Proc. of the ASME Biennial Mechanisms Conf. Force and Stiffness Transmission of Redundantly Actuated Mechanisms:The Case of a Spherical Shoulder Mechanism Yi,B.J.;Tesar,D.;Freeman,R.A.
  59. Proc. of the 1991 IEEE Int. Conf. on Robotics and Automation Reducing the Effects of Shocks Using Redundant Actuation Nahon,M.A.;Angeles,J.
  60. IEEE Tran. on Robotics and Automation v.6 no.5 Torque-Limited Path Following by On-Line Trajectory Time Scaling Dahl,O.;Neilsen,L.
  61. Proc. of the 1991 IEEE Int. conf. on Robotics and Automation Dynamic Control of a Manipulator with Passive Joints in an Operational Coordinate Space Arai,H.;Tachi,S.
  62. '95대한기계학회 춘계학술대회논문집 여유자유도 매니퓰래이터의 동력학 특성과 동력학적 제어기의 설계에 관하여 박종훈;정완균;염영일
  63. Presented at DOE/NE Robotics for Advanced Reactors Student Conference Construction and Testing of an Actuator Module Shin,Kyu-Shik