한국정보처리학회논문지 (The Transactions of the Korea Information Processing Society)
- 제3권7호
- /
- Pages.1868-1879
- /
- 1996
- /
- 1226-9190(pISSN)
이동통신시스템의 프로세서간 통신성능향상을 위한 넉아웃 스위치의 구조설계
The Design of Knockout Switch Structure For Improving Performance of Inter- Processor Communication in Mobile Communication System.
- Park, Sang-Gyu ;
- Kim, Jae-Hong (Dept.of Computer Engineering, Kyungpook National University) ;
- Lee, Sang-Jo (Dept.of Computer Engineering, Kyungpook National University)
- 발행 : 1996.12.01
초록
현재 이동통신시스템의 내부 프로세서간 통신망은 메쉬 토폴로지 형태의 단일 버 스를 이용하기 때문에 앞으로 B-ISDN과 연계될 대용량의 트래픽 처리에 한계가 있다. 또한, 이동통신시스템에서는 일반 ATM망에서의 고정 길이가 아니니 가변 길이 패킷을 사용하고 있으므로 ATM스위치를 그대로 이용할 수는 없다. 일부의 구현에서 가변길이 를 지원하는 스위치를 제시하고 있으나, 내부 동기화를 위한 전처리, 비트 지연 등의 문제가 있다. 본 논문에서는 추가적인 처리없이 가변길이의 패킷을 처리할 수 있는 경합집속기를 설계하였다. 또한 제안된 경합집속기는 입력 인터페이스에서 패킷 시작 신호를 위한 지연이 없다. 따라서, 효율적으로 패킷을 처리해 줄 수 있으며, 기존의 경합집속기에 N 비트 시간의 지연이 걸리던 것을
There are limitations to process high bandwidth traffic in B-ISDN with mesh- topology single bus architecture of current mobile communication system. And, it is impossible to import ATM switch using fixed length packet rather than variable length packet. Some implementations are able to process variable length packet, but there are some problems such as pre-processing for synchronization and bit delay. In this paper, we design a concentrator that can manipulate variable length packet without additional pre-process. There is on bit delay for packet starting signal in input interface, So it is more efficient to process packets, such that the concentrator can reduce he processing time as
키워드