Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)
- Volume 20 Issue 5
- /
- Pages.1468-1476
- /
- 1996
- /
- 1226-4873(pISSN)
- /
- 2288-5226(eISSN)
DOI QR Code
Effect of Machining Condition on Friction and Wear of Steel
탄소강의 가공조건과 마찰.마멸과의 관계
- Cheong, Chong-Hyeon (Dept.of Mechanical Engineering, Graduate School of Yonsei University) ;
-
Kim, Dae-Eun
(Dept.of Mechanical Engineering, Yonsei University)
- Published : 1996.05.01
Abstract
Surface integrity is dictated by the fabrication process of the metal part. In this work, steel specimens were prepared under various mechine conditions to achieve different degrees of deformation state. The tribological characteristics of the speciments were tested using a pin-on-disk type apparatus and other surface characterization tools. It is shown that though frictional characteristics are similar, the wear rate is significantrly affected by the properties of the surface. In the case of steel, surface cracks resulted in high wear despite the relatively high hardness of the specimen. Also, the sliding action were found to reduce the residual stress on the surface. These results indicate that there is a strong relationship between surface integrity and the tribological properties of steel, and therefore the machining condition should be optimized woth respect to tribological performance of a steel part.