Comparison of Warm Deep Drawability of Stainless Steel Sheet Between Crank Press and Hydraulic Press

크랭크 프레스와 유압 프레스에서 스테인리스 강판의 온간 드로잉성 비교

  • 김종호 (서울산업대학교 금형설계학과) ;
  • 최치수 (서울산업대학교 금형설계학과) ;
  • 나경환 (생산기술연구원 생산기반기술개발센터)
  • Published : 1995.12.01

Abstract

Warm deep drawing for optimum forming conditions to give the maximum drawing depth is investigated and compared with the results from experiments performed at room temperature. Experiments which draw square cups of STS 304 stainless steel sheet under the constant lubrication condition of teflon film are made both in a crank and hydraulic press for two kinds of specimens. The maximum drawing depth at warm forming condition reaches 1.4 times the drawing depth at room temperature in a crank press, whereas 1.6 times in a hydraulic press, and also more uniform distribution of thickness in case of warm deep drawn cup is observed. The effects of other factors on formability, such as forming temperature, speed of press and cooling of punch are examined and discussed.

Keywords