아치형 단동온실의 최적설계를 위한 풍력계수분포도의 분석

An Analysis of Wind Force Coefficient Distributions for Optimum Design of Single-Span Arched Greenhouse

  • 이석건 (경북대학교 농과대학 농공학과) ;
  • 이현우 (경북대학교 농과대학 농공학과) ;
  • 권무남 (경북대학교 농과대학 농공학과)
  • 발행 : 1995.06.01

초록

One of the most destructive forces around greenhouses is wind. Wind loads can be obtained by multiplying velocity pressure by dimensionless wind force coefficient. Generally, wind force coefficients can be determined by wind tunnel experiments. The wind force coefficient distribution on a single - span arched greenhouse was estimated using experimental data and compared with reported values from various countries. The results obtained are as follows : 1. The coefficients obtained from this study agree with the values proposed by G. L. Nelson except about 0.5 of difference in the middle region of roof section. This discrepancy is mainly attributed to the dissimilarity of experimental conditions (or wind tunnel test such as Reynolds number, type of terrain, surface roughness of model, location of the lapping and measuring methods. 2. Considering that the wind force coefficients are varied along the height of a wall at wind direction perpendicular to wall, structural analysis using subdivided wind force coefficient distribution is more resonable for wall. 3. It is recommendable that wind force coefficient distribution on a roof should take more subdivision than the existing four equal divisions for more accurate structural design. 4. Structural design using wind forces close to real values is more advantageous in safety and expense.

키워드