Abstract
Three types of methods are used to determine the lag time which is an important parameter in estimating the geomorphological instantaneous unit hydrograph (GIUH) and their results are anlyzed hydrologically in this study. The first method uses only the average velocity and second one uses the combination of the stream length and the average velocity. The third method employs the relationship between watershed area and lag time obtained from the empirical coefficients of Boyd and Singh. To verify the applicabilities of such methods to the actual river basin, the obtained lag times were tested by using the observed data. The results showed that the first method was applicable to small watershed area but not to larger area. The several other hydrologic characteristics beside the watershed area should be considered for the third method because the accuracy of the lag time was not good. Finally, the second method gave the most similar simulation results and the best agreements to the observed runoff data than any other method.
본 연구는 지형학적 순간단위도를 산정하는데 있어서, 주된 매개변수인 지체시간을 세가지형으로 결정하여, 그 결과들을 수문학적으로 해석하였다. 지체시간의 산정방법으로서 첫째로 평균유속만을 이용한 것과, 둘째로 유로연장과 평균유속을 조합한 방법을 적용하였으며, 셋째로 유역면적과 Boyd및 Singh의 경험적 계수들로부터 얻어진 지체시간의 상관식을 사용하였다. 각 방법들의 결과분석을 위하여 실제유역의 자료들을 사용하였으며, 그 결과로부터 소유역의 경우에는 평균유속만의 방법도 가능하나, 유역면적이 커질수록 유출량의 재현성에 있어 정확도가 떨어짐을 알 수 있었다. 또한 세번째 방법은 지체시간의 정확도가 떨어져, 면적뿐만 아니라 다른 수문학적 특성인자들도 고려되어야 함을 나타내었다. 따라서, 적용방법들중 두번째 방법이 지체시간 산정에 있어서 우수함을 보여주었으며, 이로부터 구한 유출량도 타 방법들에 비해 실측치와 가장 근사하게 접근하였다.