References
- Proc.of the 7th Thermal Spray Conf. Abrasive and Erosion Wear Resistance of Cr₃C₂-NiCr Coating Prepared by Plasma;Detonation and High Velocity Oxy-Fuel Spraying P. Vuoristo;K. Niemi;A. Makela
- J Vac Sci.Technol v.A3 no.6(Nov/Dec) Plasma Spray Deposition Efficiencies G. Wuest;S. Keller
- Acta Metall Mater v.38 no.11 Modelling of the Temperature and the Velosity of Ceramic Powder particles in a Plasma Flame-II Zirconia D.K. Das;R. Sivakumar
- Proc.of the 7th Thermal Spray Conf. Investigation of Erosion-Resistant Chromium Carbide Coating Sprayed with the High Pressure HVOF Process G. Irons;W.R. Kralochvil;W.R. Bullock;A. Roy
- Proc.of the 7th Thermal Spray Conf Correlation between Spraying Conditions and Microstructure for Alumina Coating Produced by HVOF and VPS D.A.J. Ramm;T.W. Clyne
- Proc.of the 7th Thermal Spray Conf The effect of Microstructure on the Wear Behavior of Thermal Spray Coatings S.E. Hartfield-Wunsch;S.C. Tung
- 대한금속학회지 v.31 no.10 플라즈마 용사법에 의한 Cr₃C₂피막층의 열처리특성에 관한 연구 김수식;김한삼
- Proc.of the 1993 National Thermal Spray Conf Degradation Behavior of plasma Sprayed Cr₃C₂-NiCr Coating at High Temperatures S.Y. Hwang;B.G. Seong
- 한국요업학회지 v.30 no.12 플라즈마용사법에 의한 ZrO₂-Y₂O₃ 코팅의 고온에서의 마모 김장업;임대순;안효석
- 한국요업학회지 v.31 no.3 플라주마용사된 부분안정화 지르코니 아코팅의 상온 마모 거동에 미치는 열처리 온도 및 분위기의 영향 김장업;임대순
- Quality Engineering Using Robust Design Madhave S. Phadke
- Proc.of the 7th Thermal Spray Conf Porosity in Plasma Sprayed Alumina Deposits J. IIavsky;H. Herman;C.C. Berndt;A.N. Goland;G.G. Long;S. Krueger;A.J. Allen
- Friction and Wear of Ceramics Said Jahanmia edted
- Abrasive Wear Performance of Cr₃C₂-25% NiCr Coalings by Plasma Spray and CDS Detonation Spray Y.S. Jin;Y. Wang
- Wear v.155 A Fracture Model for Wear Mechanism in Plasma Sprayed Ceramic Coating Materials Tong Zhaohe;Ding Chuanxian;yan Dongsheng