Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)
- Volume 4 Issue 3
- /
- Pages.39-47
- /
- 1995
- /
- 2508-5093(pISSN)
- /
- 2508-5107(eISSN)
A Generalized Analysis of Volumetric Error of a Machine Tool Machining a Sculpture
자유곡면을 가공하는 공작기계 체적오차의 일반화 해석
Abstract
This paper suggests generalize mathematica mode for the benefit of volumetric error analysis of a multi-axis machine tool machining a sculptured surfaces. The volumetric error, in this paper, is defined as a three dimensional error at the cutting point, which is caused by the geometric errors and the kinematic errors of each axis and alignment errors of the cutting tool. The actual cutting position is analyzed based on the form shaping model including a geometric error of the moving carriage, where a form shaping model is derived from the homogeneous transformation matrix. Then the volumetric error is obtained by calculating the position difference between the actual cutting position and the ideal one calculated from a Nonuniform Rational B-Spline named as NURES. The simulation study shows the effectiveness for predicting the behavior of machining error and for the method of error compensation.
Keywords