공업화학 (Applied Chemistry for Engineering)
- 제5권1호
- /
- Pages.54-62
- /
- 1994
- /
- 1225-0112(pISSN)
- /
- 2288-4505(eISSN)
MBS상용화제를 사용한 PC/PET Alloy의 제조와 그 물성
Preparation of Properties of PC/PBT Alloy Using MBS Compatibility
- Lee, Yong-Moo (Dept. of Polym. Sci. and Eng., Dankook Univ.) ;
- Kang, Doo-Whan (Dept. of Polym. Sci. and Eng., Dankook Univ.)
- 투고 : 1993.06.25
- 심사 : 1993.10.18
- 발행 : 1994.02.01
초록
비결정성인 PC와 결정성인 PET를 블렌드하여 PC/PET합금을 제조하는데 있어서 PC 및 PET와 혼화성이 우수한 methylmethacrylate와 butadiene, 그리고 내충격성이 우수한 polystyrene의 block unite를 갖는 methylmethacrylate-butadiane-styrene(MBS) 공중합체를 상용화제로 사용함으로써 강인성과 내충격강도가 우수하고 PC의 함량을 15parts 이상 사용하여도 혼화성이 우수한 PC/PET 합금을 얻었다 열적 특성으로 PC/PET에 MBS를 첨가하여 얻은 alloy에 대한 PC와 PET의 Tg차이가
Bisphenol A polycarbonate(PC) and polyethylene terephthalate(PET) was blended with methylmethacrylate-butadiene-styrene(MBS) copolymer for the improvement of impact resistance strength PC/PET alloy blending with PC more than 15 parts to 100 parts of PET usually have poor compatability, but increased the compatability characteristics of PC/PET alloy prepared by addition of MBS compatabilizer. The compatability of PC and PET using compatabilizer, MBS was determined by measuring the thermal characteristics of Tg difference between PC and PET, and crystallization temperature, Tcc. As the Tg difference becoming narrow to
키워드