Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Nonlinear dynamic FE analysis of structures consisting of rigid and deformable parts -Part II - Computer implementation and test examples

  • Rojek, J. (Institute of Fundamental Technological Research, Polish Academy of Sciences) ;
  • Kleiber, M. (Institute of Fundamental Technological Research, Polish Academy of Sciences)
  • Published : 1994.12.25
⟨ Previous Next ⟩

Abstract

This is the second part of the paper (Rojek and Kleiber 1993) devoted to nonlinear dynamic analysis of structures consisting of rigid and deformable parts. The first part contains a theoretical formulation of nonlinear equations of motion for the coupled system as well as a solution algorithm. The second part presents the computer implementation of the equations derived in the first part with a short review of the capabilities of the computer program used and the library of finite elements. Details of material nonlinearity treatment are also given. The paper is illustrated by discussing a practical problem of a safety cab analysis for an agricultural tractor.

Keywords

References

  1. AEAE Standard: ASAE S383(SAE J1194). Roll-over protective structures(ROPS) for wheeled agricultural structures.
  2. ISO 3463/3. Agricultural and forestry wheeled tractors - Protective structures - dynamic test methods and acceptance conditions.
  3. ISO 5700. Agricultural tractors - Protective cabs and protective frames - static loading test method and acceptance conditions.
  4. Bathe, K.J. (1982), Finite Element Procedures in Engineering Analysis, Prentice-Hall.
  5. Bathe, K.J., Ozdemir, H., and Wilson, E.L. (1974), "Static and dynamic geometric and material nonlinear analysis", Technical report, Structural Engineering Laboratory, Univ. California.
  6. Belytschko, T. (1992), "On computational methods for crashworthiness", Comput. Struct., 42, 271-279. https://doi.org/10.1016/0045-7949(92)90211-H
  7. Clough, R. W. and Felippa, C. A. (1968), "A refined quadrilateral element for analysis of plate bending", Proc. Conf. Matrix Methods in Struct. Mech.
  8. Cook, R. D., Malkus, D. S., and Plesha, M. E. (1989), Concepts and Applications of Finite Element Analysis, Wiley.
  9. Crisfield, M.A. (1981), "Finite element analysis for combined material and geometric nonlinearities", Proc. of the Europe-U. S. Workshop Nonlinear Finite Element Analysis in Structural Mechanics, Bochum, Germany, Springer.
  10. Egger, H. and Kroplin, B. H. (1978), "Yielding of plate with hardening and large deformation", Int. J. Num. Meth. Eng., 12, 739-750. https://doi.org/10.1002/nme.1620120501
  11. Eidsheim, O. M. andLarsen, P. K. (1981), "A study of some generalized constitutive models for elastoplastic shell, Proc. of the Europe-U. S. Workshop Nonlinear Finite Element Analysis in Structural Mechanics, Bochum, Germany, Springer.
  12. Gallagher, R.H. (1975), Finite Element Analysis: Fundamentals, Wiley.
  13. Haug, E., Arnaudeau, F., de Rouvray, A. and Chedmail, J. (1983), "Static and dynamic finite element analysis of structural crashworthiness in the automative and aerospace industries", Structural Crashworthiness. First International Symposium on Structural Crashworthiness, Liverpool, Butterworth.
  14. Haug, E., Dagba, A., Clinckemaillie, J., Aberlenc, F., Pickett, A., Hoffmann, R. and Ulrich, D. (1989), "Industrial crash simulations using the PAM-CRASH code", P. Melli and C. A. Brebbia, editor, Supercomputing in Engineering Structures, Springer.
  15. Hayduk, R. J., Winter, R., Pifko, A. B. and Fasanella, E. L. (1983), "Application of the non-linear finite element computer program DYCAST to aircraft crash analysis", Structural Crashworthiness. First International Symposium on Structural Crashworthiness, Liverpool, Butterworth.
  16. Hien, T. D., Hung, H. X. and Kleiber, M. (1989), "Stability analysis of structures and the code POLSAP", IFTR-Report Pol. Acad. Sci., 34 (in Polish).
  17. Kearns, C. F. (1987), "Application of computational plasticity to the analysis of vehicle cab frames", Eng. Comput., 4, 243-246. https://doi.org/10.1108/eb023703
  18. Kecman, D. (1983), "Analysis of framework-type safety structures in road vehicles", Structural Crashworthiness. First International Symposium on Structural Crashworthiness, Liverpool, Butterworth.
  19. Kleiber, M. and Rojek, J. (1992), "Dynamic analysis of structures consisting of inelastic deformable and rigid parts", Computational Plasticity, Proc. of the 3rd Int. Conf., Barcelona.
  20. Kleiber, M. and Wozniak, Cz. (1991), Nonlinear Mechanics of Structures, Kluwer- PWN.
  21. Olszak, W., Perzyna, P. and Sawczuk, A. (ed.) (1965), Theory of Plasticity, PWN, Warsaw. (in Polish)
  22. Rojek, J. (1992), "Nonlinear numerical analysis of mechanical problems of structures consisting of deformable and rigid parts; application to the analysis of safety cabs for tractors", Ph.D. Thesis, IPPT PAN, Warsaw. (in Polish).
  23. Rojek, J. and Kleiber, M. (1993), "Nonlinear dynamic FE analysis of structures consisting of rigid and deformable parts. Part I-Formulation", Struct. Eng. and Mech. An Int. J. (submitted).
  24. Rojek, J. and Kleiber, M. (1991), "Transient nonlinear response of frame and shell structures", X Polish Conference "Computer Methods in Mechanics", Swinoujscie, Poland.
  25. Rojek, J., Kleiber, M., Napolski, M. and Sosnowski, W. (1991), "Elastic-plastic analysis of plates and frame-plate structures", Mechanika i Kormputer, 10, 81-102 (in Polish).
  26. Rusinski, E. (1983), "Numerical aspects of the analysis of protective cabs of tractors", 6th Conf. Comp. Methods in Struct. Mechanics, Mechanics, Bialystok(in Polish).
  27. Rusinski, E. (1984), "Numerische Berechnung von Schleppersicherheitskabinen", Grundl.Landtechnik, 34(6).
  28. Schweizerkof, K., Nilson, L. and Hallquist, J.O. (1991), "Crashworthiness analysis in the automative industry", International Journal of Computer Applications in Technology(special issue).
  29. Sosnowski, W. (1989), "ASGRAM-3D-numerical elastic-plastic analysis of space frames", Mechanikai Komputer, 9, 31-44 (in Polish)
  30. Surana, K.S. (1978), "Lumped mass matrices with non-zero inertia for general shell elements", Int. J. Num. Meth. Eng., 12, 1635-1650. https://doi.org/10.1002/nme.1620121102
  31. Tidbury, G.H. (1984), "The design of bus and truck structures for passenger and crew safety", Int. J. of Vehicle Design, 5 (1).
  32. Toi, Y. and Yang, H.J. (1991), "Finite element crush analysis of framed structures", Comput. Struct., 41, 137-149. https://doi.org/10.1016/0045-7949(91)90163-G
  33. Tong, P. and Rossetos, J. N. (1977), "Modular finite element approach to structural crashworthiness prediction", Comput. Struct., 7, 109-116. https://doi.org/10.1016/0045-7949(77)90065-7
  34. Ueda, Y. and Fujikubo, M. (1992), "Plastic node method considering strain-hardening effects", Comput. Meth. Appl. Mech. Eng., 94, 317-337. https://doi.org/10.1016/0045-7825(92)90058-R
  35. Ueda, Y. and Yao, T. (1982), "The plastic node method: a new method of plastic analysis", Comput. Meth Appl. Mech. Eng., 34, 1089-1104. https://doi.org/10.1016/0045-7825(82)90103-7
  36. Yeh, R.E., Huang, Y. and Johnson, E.L., An analytical procedure for the support of ROPS design, SAE Transactions, 760690.
  37. Zyczkowski, M. (1981), Combined Loading in the Theory of Plasticity, PWN, Warsaw.