Water Storage Characteristics of Surface Soil by the Different Forest Floor Conditions(II)

지피상태(地被狀態)에 따른 임지(林地)의 수저유(水貯留) 특성(特性)(II)

  • Lee, Heon Ho (Department of Forest Resources, College of Agriculture and Animal Science, Yeungnam University) ;
  • Lee, Chang Woo (Department of Forest Resources, College of Agriculture and Animal Science, Yeungnam University)
  • 이헌호 (영남대학교 농축산대학 산림자원학과) ;
  • 이창우 (영남대학교 농축산대학 산림자원학과)
  • Received : 1994.05.14
  • Published : 1994.12.31

Abstract

This study was carried out to get the basic data for obtaining water resources continuously. Water storage of forest land was estimated by effective water storage based on classifying soil pore. The results were summarized as follows ; 1. Percentage of coarse pores were in the order : Forest>Bare land>Grasses. As soil depth increased, total pores, coarse pores, and maximum water content were decreased, while fine pores increased. 2. Soil pore percentage and physical properties of surface layer(0~20cm) were significantly different among forest floor conditions. However, there were no difference in soil pore percentage and physical properties in 20~40cm and 40~60cm according to forest floor conditions. In the same plot, on the other hand, soil pore percentage and physical properties were significantly different between surface layer(0~20cm) and 20~40cm, but there were no differences between 20~40cm and 40~60cm. 3. Effective water storage was highly correlated with coarse pore in all plots. 4. The model for water storage capacity of each forest floor condition expressed by effective water storage was produced using coarse pores and soil depth.

본 연구는 임지의 수저류능력을 토양공극 구분에 의한 실제 이용가능수량으로 평가하여 지속적인 수자원의 확보를 위한 기초자료를 제공할 목적으로 수행하였으며, 그 결과는 다음과 같다. 1. 조공극은 임지>임간나지>초지의 순으로 높았고, 토심이 깊을수록 전공극, 조공극, 이용가능수량은 감소하는 반면, 세공극은 점차 증가하는 것으로 나타났다. 2. 토양의 공극과 이학적 특성은 지피상태별로 표층(0~20cm)에서 고도의 유의차를 보이는 반면, 토심 20~40cm와 토심 40~60cm에서는 큰 차이가 없었다. 한편, 동일 시험구에서 표층(0~20cm)과 토심 20~40cm와는 큰 차이를 보이나 토심 20~40cm와 토심 40~60cm와는 큰 차이가 없었다. 3. 전 시험구에서 이용가능수량은 조공극과 고도의 상관관계를 나타냈다. 4. 조공극량과 토심을 이용하여 나타낸 이용가능수량으로 각 지피상태별 수저류량 추정모델을 산출할 수 있었다.

Keywords