Journal of the Korean Society for Precision Engineering (한국정밀공학회지)
- Volume 11 Issue 5
- /
- Pages.33-41
- /
- 1994
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
Design and fabrication of 2MN hydraulic force standard machine
2MN 유압식 힘 표준기의 설계 및 제작
- Kang, D.I. ;
- Song, H.K. ;
- Lee, J.T. ;
- Ahn, B.D. ;
- Kim, C.Y. ;
- Lee, J.Y.Ahn, B.C.Cheong, K.K.Jeon, Y.H.
- 강대임 (한국표준과학연구원 역학연구부) ;
- 송후근 (한국표준과학연구원 역학연구부) ;
- 이정태 (한국표준과학연구원 역학연구부) ;
- 안병덕 (한국표준과학연구원 역학연구부) ;
- 김창열 (동명중공업(주)) ;
- 이재율안병출정광국전영홍 (동명중공업(주)동명중공업(주)동명중공업(주)동명중공업(주))
- Published : 1994.10.01
Abstract
For the establishment of large force standard and the accurate measurement of large force, 2MN hydraulic force standard machine which consists of loading frame, deadweight machine, two ram/cylinder systems and hydraulic control system was designed and fabricated. Measurement results of shapes for tow ram/cylinders reveal that the ratio of effective area is 200.094. The relative deviation of force stability for the machine is about .+-. 0.01% at 2MN and is less than .+-. 0.005% below 2MN. This machine may be widely used to calibrate the force measuring devices in industry and to test the force sensors.
Keywords