Abstract
On PT/Ti/Si substrates, PZT thln fllms are deposited at $300^{\circ}C$ by rf magnetron sputtering uslng a $(PbZr_{52}, Ti_{48})O_{3}$ composltc cerarnlc target. To abtaln, the stable phase, perovskltc structure, furnace annealmg techmque had been cmplo:~d In PbO amb~ent for the $550^{\circ}C$-$750^{\circ}C$ temperature ranges. On Pt(250$\AA$)/Ti(500$\AA$)/Si, Pt(1000)$\AA$/Ti(500$\AA$)/Si substrates, effects of Ti layer and Pt thickness are studled. Though thickness of the Pt layer 1s 1000$\AA$). oxygen diffusion is not prevented and accelerated by Ti layer actlng for oxygen sink sites durmg furnace annealing. The upper TI layer 1s transformed Into TIOX by oxyen dlffuslon and lower Ti layer Into silicide with in-diffused Pt. The formation of TiOx layer seems to affect the orlentatton of the PZT layer. Furnace annealed f~lm shows ferroelectr~c and electrical properties wth a remanent polarlzation of 3.3$\mu A /\textrm{cm}^2$, , coerclve fleld of 0.15MV/cm, a=571 (10kHz), leakage current 32.65$\mu A /\textrm{cm}^2$, , breakdown voltage of 0.4OMV/cm.
$(PbZr_{52},Ti_{48})O_{3}$인 composite ceramic target을 사용하여 R. F. 마그네트론 스퍼터링 방법으로 기판온도 $300^{\circ}C$에서 Pt/Ti/Si 기판위에 PZT 박막을 증착하였다. 페롭스 카이트 PZT박막을 얻기 위하여 PbO분위기에서 로열처리를 행하였다. 하부전극으로 Pt를 사용하였으며 Pt(205$\AA$)/Ti(500 $\AA$)/Si 및 Pt(1000$\AA$)/Ti(500$\AA$)/Si기판을 준비하여 Pt두께화 Ti층이 산소의sink로 작용함으로서 이를 가속화하였다. Ti층의 상부는 산소의 확산으로 인하여 TiOx층으로 변태하였고 하부는 in diffused Pt와 함께 실리사이드층을 형성하였다. TiOx 층의 형성은PZT층의 방향성에 영향을 주었다. 유전상수 (10kHz), 누설전류, 파괴전압, 잔류분극 및 항전계는 각각 571, 32,65$\mu A /\textrm{cm}^2$, 0.40MV/cm, 3.3$\mu C /\textrm{cm}^2$, 0.15MV/cm이었다.