이방정규압밀점토의 비배수크리프 파양

Undrained Creep Rupture of an Anisotropically Normally Consolidated Clay

이방압밀이 비배수크리프파괴거동에 미치는 영향을 연구하기 위하여 4가지의 압밀응력비(a:In'/clc': 1.0, 0.7, 0.5, 0.4)로서 정규압밀시킨 점토시료에 대해서 비배수크리프시험을 수행하였다. 어떤 최소변형률속도에 이르는 경과시간은 압밀응력비의 감소에 따라 줄어들고 이 최소변형률속도에 대한 파괴시간도 감소된다. Finn and Shead(1.1의 제안식에 의해서 구한 상한항복강도는 압밀응력비의 크기에 관계없이 크리프강도와 잘 일치하며 평균구속응력으로서 정규화한 상한항복 강도는 압밀응력비가 증가할수록 감소한다.

The Undrained creep tests on the normally consolidated clays with four different consolication ratios(c3c'/clc': 1.0, 0.7, 0.5, 0.4) were performed to investigate the effects of avisotropic consolidation on the undrained creep rupture behavior. The elapsed time to a certain minimum strain rate is decreased with decreasing the value of the consolidation pressure ratio, and the elapsed time to rupture for a certain minimum strain rate is also decreased with decreasing the ratio. The upper yield strength obtained from the equation suggested by Finn and Shead(1.) is coincided well with the creep strength irrespective of the magnitude of the consolidation pressure ratio, and the normallised upper yielding strength by mean confining pressure is decreased with increasing the consolidation pressure ratio. The critical strain for creep rupture, the strain at min. strain rate, is constant irrespective of the magnitude of creep stress, but it increased exponentially with increasing the ratio, It accordingly is dangerous that the potential of in-situ creep rupture is estimated only by the creep rupture test on the isotropically consolidated clay in case of K0-value below 1.0.