한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제30권2호
  • /
  • Pages.131-138
  • /
  • 1993
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지

커플링제로 처리된 질화규소 분말의 사출성형

Injection Molding of Silicon Nitride Powders Treated with Coupling Agents

  • 송휴섭 (한국과학기술연구원 세라믹스공정연구실)
  • 발행 : 1993.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effects of silane coupling agents on the injection molding process were investigated using silicone nitride mixtrues with a binder system containing polypropylene as a major binder (55vol% solid loading). The formation of bonding between silicon nitride powder and coupling agents was confirmed through the analyses of powder surface. The use of coupling agents improved mixing characteristics judged by the torque change during mixing process. the coupling agents also reduced molten viscosity of the mixture considerably, which is a main factor to determine the flow of the mixture. However, the bonding between coupling agents and polymers had a negative effect on the debinding process by retarding the thermal decomposition.

키워드

참고문헌

  1. Am. Ceram. Soc. Bull v.70 no.1294 Key Issues in Powder Injection Molding R.M. German;K.F. Hens;S.T.P. Lin
  2. 대한금속학회 제4회 분말야금 심포지움 별책 no.159 세라믹 사출성형에서 고분자 결합제의 영향 송휴섭;진인주
  3. J. Mater. Sci. v.23 no.2115 The Use of Silane Coupling Agents in Ceramic Injection Molding J.G. Zhang;M.J. Edirisinghe;J.R.G. Evans
  4. Additives for Plastics R.B. Seymour
  5. J. Adhes. Soc. Jpn. v.18 no.345 Adhesion of the Vacuum-Deposited Cobalt Thin Films to Polymer Films K. Sumiya;T.Tani;K. Nakamae;T. Matsumoto
  6. J. Chem. Phys. v.10 no.342 Energy Relations of the Surfaces of Solids Ⅱ. Spreading Pressure as Related to the Work of Adhesion Between a Solid and a Liquid W.D. Harkins;H.K. Livingston
  7. 파인세라믹스의 사출 성형기술 劑藤勝義;荒木田豊;非上誠
  8. J. Mater. Sci. Lett. v.9 no.1039 The Use of Silane Coupling Agents in Ceramic Injection Molding: Effect on Polymer Removal M.J. Edirisinghe
  9. Silane Coupling Agents E.P. Plueddemann
  10. Adhesion Aspects of Polymeric Coatings K.L. Mittal
  11. 사출에 의한 요업재료의 성형 송휴섭
  12. Int. J. High Tech. Ceram. v.2 no.1 Review: Fabrication of Engineering Ceramics by Injection Moulding I. Material Selection M.J. Edirisinghe;J.R.G. Evans
  13. J. Colloid Interface Sci. v.74 The Structure of γ-Aminopropyltriethoxysilane on Glass Surfaces C.H. Chiang;H. Ishida;J.L. Koenig
  14. X-ray Photoelectron Spectroscopy Database C.D. Wagner
  15. Solid/Liquid Dispersion Flocculation by Polymers and Polyelectrolytes J. Gregory;T.E. Tadros(ed.)
  16. J. Am. Ceram. Soc. v.72 no.99 Organic Silanes and Titanates as Processing Additives for Injection Molding of Ceramics K. Lindqvist;E. Carlstrom;M. Persson;R. Carlsson
  17. Ph.D. Thesis Pyrolysis Behavior of Polymeric Binders Y.N. Sun