Effects of Composition and Polymerization Rate on the Structure and Properties of Polyurethane/Polystyrene IPN (I) - Effects of Composition and Additives on the Polymerization Rate-

Polyurthane/Polysteyrene IPN에서 조성과 중합속도가 미세구조와 물성에 미치는 영향(I) - 조성 및 첨가제가 중합속도에 미치는 영향-

  • 이재덕 (숭실대학교 공과대학 섬유공학과) ;
  • 조현태 (숭실대학교 공과대학 섬유공학과)
  • Published : 1992.08.01

Abstract

The polyurethane/polsytrene interpentrating polymer net (PU/PS IPN) was perpaed by simultaneous polmerization method. The effect of preparation conditions on the reaction rates of each component were investigated. The reaction rate of PU component increased with the increase of concentration of crosslinking catalyst(OcSn) of PU component and molecular weight of PU prepolymer. The reaction rate of PS component increased remarkably with the increase of initiator(BPO) concentration, crosslinking agent(Trim) of PS component and with the decrease of molecular weight of PU prepolymer.

Keywords

References

  1. J. Appl. Polym. Sci. v.27 D.W.Barlett(et al)
  2. J. Appl. Polym. Sci. v.28 M.Yokouchi;S.Seto;Y.Kobayashi
  3. Polym. Eng. Sci. v.24 J.W.Barlow;D.R.Paul
  4. Metal-Filled-Polymers S.K.Bhattacharya
  5. Russ. Chem. Rev. v.45 no.1 Y.S.Lipatov;L.M.Sergeeva
  6. Rubber Chem. Technol. v.40 K.Shibayama;Y.Suzuki
  7. J. Appl. Polym. Sci. : A-2 v.7 L.H.Sperling;D.W.Friedman
  8. J. Appl. Polym. Sci. v.14 L.H.Sperling(et al)
  9. J. Appl. Polym. Sci. v.20 D.S.Kaplan
  10. Polymer v.25 J.R.Ebdon;D.J.Hourston;P.G.Klein
  11. Polymer v.30 X.W.He(et al)
  12. Purification of Laboratory Chemicals(2nd Ed.) D.D.Perrin(et al)
  13. Handbook of Analysis of Synthetic Polymers and Plastics G.G.Cameron
  14. ASTM D 2572-80
  15. Polymer Reaction Engineering T.Rintelen;K.Riederle;K.Kirchner
  16. Polymer Reaction Engineering: Viscosity Effects in Polymerization Reactors B.W.Brooks;J.S.T.Bogumjoko
  17. Applied Sci. Polyurethane Elastomer : Reaction Rates, Catalysts and Surfactants C.Hepburn
  18. Polymer v.24 H.Djomo(et al)
  19. Polymer v.24 H.Djomo;J.M.Widmaier;G.C.Meyer
  20. Polymer v.15 G.Allen(et al)