Journal of Welding and Joining
- Volume 10 Issue 3
- /
- Pages.1-12
- /
- 1992
- /
- 2466-2232(pISSN)
- /
- 2466-2100(eISSN)
Weldability of Al Alloys,Part I ;Cfacking and Porosity
알루미늄 합금의 용접특성 - part I : 균열 및 기공
Abstract
A literature review was conducted to survey informations available on the welding metallurgy of aluminum alloys and its effect on fusion weldability, especially on solidification cracking and pore formation. Solidification cracking behavior of Al weld is a complicate matter as compared to other high alloys, where a relatively simple Fe-X(most detrimental elements S, P, B, Si, etc) binary diagram can be successfully applicable. Both additive and synergistic effects of elements should be considered together. A same element play a different role from system to system. Porosity, caused by hydrogen contamination of the weld is one of the most troublesome welding problems. The primary sources of hydrogen are believed to be an absorbed moisture on the filler metal or base metal and in the shielding gas. It is extremely important that reliable quality-control procedures be employed to eliminate all possible sources of hydrogen contamination. Selection of proper process and parameters is sometimes more important than controlling of alloying elements in order to make a defect-free weld.