Studies on the Standardization for Logging Operation

벌목작업(伐木作業) 표준화(標準化) 연구(硏究)

  • Kang, Gun-Uh (Collage of Agriculture and Animal Science, Youngnam University)
  • 강건우 (영남대학교 농축산대학)
  • Received : 1991.04.02
  • Published : 1991.06.30

Abstract

The main purpose of this research is to standardize the logging operation with special reference to the net working time for thinning. This study was carried out to obtain the standard working method and working technique for Korean logging operation through the comparison of the present Korean working method and the German standard working method 1. The net working time devided into work elements showed little difference between those two working methods. 2. From the correlation analysis, net working time was significantly correlated with breast height diameter, the dependant variable, with the highest correlation coefficient in each species. 3. Total working time increases by 11 to 13 seconds to every 1 centimeter increase in breast height diameter from i to 16 centimeter. 4. The result of this study concluded that the German working method is recommended for improving the labour problems in the forest operation due to high wages and lack of manpower gradually increasing from now in Korea. In addition to the application of this standard working method, the technical training for the method should be done to the workers for improving the productivity.

본(本) 연구(硏究)는 침 활엽수에서 몇 수종(樹種)을 선정하여 독일(獨逸)의 표준화(標準化)된 작업방법(作業方法)과 우리나라 임업생산(林業生產)에서 실제(實際) 이용(利用)되고 있는 작업방법(作業方法)을 비교(比較) 연구(硏究)하여 우리의 실정에 맞는 표준화(標準化)된 작업방법(作業方法)을 확실하게 구명(究明)하여 임업경영(林業經營)에서의 생산비용(生產費用)(인건비(人件費)) 절감(節減)과 아울러 산림작업(山林作業)의 성력화(省力化)에 효율적(效率的)으로 적용(適用)하고자 한다. 1. 두가지의 작업방법(作業方法)을 비교(比較)한 결과(結果) 동일한 작업조건(作業條件)에서 순수작업(純粹作業) 소요시간(所要時間)은 별 차이(差異)가 없었다. 2. 수종별(樹種別) 순수작업시간(純粹作業時間)을 요소작업별(要素作業別)로 분석(分析)한 벌도(伐倒)와 절동시간(切棟時間)은 침엽수종(針葉樹種)보다 참나무가 더 많은 시간소요(時間所要)를 보여 주는 바, 이는 재질이 단단함 때문인 것으로 판단되며, 조재시간(造材時間)은 참나무보다 침엽수종(針葉樹種)이 시간소요(時間所要)가 더 많은 것은 침엽수종(針葉樹種)이 참나무에 비하여 가지수(NOB)가 더 많기 때문인 것으로 나타났다. 3. 종합적(綜合的)으로 볼 때 작업시간(作業時間)은 보통 흉고직경(胸高直徑) 1cm가 증가하면서 작업방법(作業方法)에 따라 약간의 차이는 있으나 11-13초가 증가(增加)되었다. 4. 이 결과(結果)로부터 각기 다른 두 작업방법(作業方法)에서 작업(作業)에 소요(所要)되는 시간(時間) 차이(差異)는 거의 없어 우리나라에서도 독일(獨逸)에서 이용되고 있는 1인1조 작업방법(作業方法)으로 전환(轉換)할 것을 추천(推薦)하며, 앞으로 인건비(人件費)의 상승(上昇)과 산촌(山村)의 인력난(人力難)으로 인하여 점차 어려워지는 실정에 있어 현 시점에서 작업원(作業員)의 기능교육(技能敎育)을 확대실시하고 동시에 이와 같은 표준적(標準的)인 작업방법(作業方法)을 적용(適用)하여 생산성(生產性) 향상(向上)을 도모(圖謀)해야 한다.

Keywords

Acknowledgement

Supported by : 한국과학재단